- Move SCRIPTS_DIR/DATA_DIR/STATE_DIR from appdata to /boot/config/plugins/varaverk
- All state files now in STATE_DIR (no more /tmp or /boot/config root writes)
- Bootstrap: Gitea-first clone with GitHub fallback, no array dependency
- varaverk.cfg seeded with Gitea connection settings
- .gitignore: add State_Files/, varaverk.cfg, varaverk-*.txz
- Partnership/transcode/fallback scripts use STATE_DIR variables
- PHP config.php: DATA_DIR/STATE_DIR constants, VV_SETUP_STATE_FILE dynamic
- deploy.sh PROD_ROOT updated to plugin flash dir
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Was looking for host1.conf at SCRIPTS_ROOT/host1.conf instead of
SCRIPTS_ROOT/Configurations/host1.conf — causing the 'host1.conf not found'
warning and leaving HOST1_SSH_KEY unwritten after key generation.
flag_key was declared with 'local' at script top level, which is only
valid inside bash functions. This left flag_key empty, writing '=true'
(malformed) to setup.db instead of 'HOST1_LOCAL_DONE=true'.
Changed to a plain variable assignment.
- Single '▶ Onboard' button per unprovisioned remote → expands that card
to show Step 1 (terminal link + click-to-copy command) and Step 2 (Push Conf)
- Onboard state persists across 10s poll re-renders via top-level _vvOnboarding map
and _vvPtReload hook set by the IIFE
- Phase 1 complete: amber 'SSH ready' pill + Tailscale IP + Phase 2 manual button
- Phase 2 complete: green 'Active' pill + date + IP + uptime + unRAID version + state
- Compact compact '○ Not provisioned' + Reset button when not in onboard mode
- Removed vvPtPhase1 (replaced by vvPtStartOnboard toggle)
- vvPtStartOnboard / vvPtEndOnboard are top-level functions
At phase 0, show below the buttons:
- 'Open Terminal' link using HOST1's Tailscale IP (/webterminal/ttyd/)
- Clickable command code block (click to copy) with the Phase 1 script path
- Note that tab auto-updates on next poll when the script completes
Tailscale IP comes from selfNode.ts_ip already in the API response.
partnership_onboard.sh (--phase1-only):
- Test if SSH already works first (BatchMode) — skip ssh-copy-id if yes
- If ssh-copy-id fails (no TTY in background): soft-fail, generate key locally,
print pubkey for manual install, write HOST2_KEY_READY=true, run local setup
- Only skip conf push if SSH truly unavailable; otherwise proceeds normally
- Exit 0 with clear manual-step instructions instead of hard failure
include/partnership.php:
- Read HOST2_KEY_READY from setup.db; expose as key_ready on remote nodes
pages/partnership.php:
- Node card: amber "Key generated · install on HOST2 then Push Conf" badge
when key_ready=true and phase=0
- "Push Conf (key installed)" button appears when key_ready=true — runs
--phase1-only --skip-ssh (assumes user manually did ssh-copy-id)
- vvPtPushConf() top-level function
vv_partner_state() now reads setup.db and adds onboard_phase (0/1/2/null)
to each host entry.
Partner card JS renders a badge under the hostname for remote hosts that
haven't completed Phase 2: amber "Awaiting onboard" (phase 1) or grey
"Not provisioned" (phase 0). Phase 2 complete shows nothing extra.
When HOST1 completes its local setup (--onboard --local-only), enable the
partnership in master.conf so sync scripts start functioning immediately.
Pushes the updated master.conf to all listed hosts via vv_push_master_conf().
partnership_manager.sh:
- --local-only flag for --onboard: skips remote pre-flight, WebUI reconfig,
state push; runs FolderView3 folder creation + writes HOST1_LOCAL_DONE=true
to setup.db + pushes it; exits without writing ACTIVE (partnership not yet
established until Phase 2)
partnership_onboard.sh:
- Phase 1 exit now runs partnership_manager.sh --onboard --local-only after
SSH + conf push, so HOST1 is fully configured on its own side before Phase 2
include/partnership.php:
- vv_pt_nodes() reads HOST1_LOCAL_DONE from setup.db; exposes as local_done
on the self node (null for remote nodes)
pages/partnership.php:
- Self node card shows green "Local setup complete · waiting for partner"
badge when local_done=true
- Actions: "Complete HOST1 Setup" button appears when HOST1 hasn't run local
setup yet but HOST2 is already at phase 1 — lets user trigger it manually
- vvPtLocalSetup() top-level function calls partnership_manager.sh via run.php
If run.php returns an empty body (transient nginx/PHP-FPM issue), the script
still runs via nohup. Treat empty response as ok instead of throwing a
JSON parse error that misleads the user into thinking the action failed.
onboard_cancel.sh:
- SSHes HOST2 while key still valid: removes HOST1 pubkey from authorized_keys
and clears HOST2_PHASE* from setup.db on the remote side
- Deletes local private + public key pair
- Clears HOST2_PHASE* from local setup.db
- Graceful if HOST2 unreachable (local side still cleaned up)
partnership.php:
- Cancel button (warn style, slightly dimmed) at phase 0 and phase 1
- vvPtCancel() top-level function, calls onboard_cancel.sh via run.php
window.fn = inside an IIFE is not reliable in all script-loading contexts.
Move vvPtPhase1/2, vvPtOnboard, vvPtOffboard and their _vvPtRun helper
above the IIFE as plain top-level function declarations — unconditionally
global and reachable from onclick= attributes.
Tab pages use full page reloads (not AJAX) — function declarations inside
the IIFE are not in global scope, so onclick= attributes fail silently.
Fix: assign all onclick-callable functions to window.*
Replace vvRunById() calls with direct fetch (vvRunById is also IIFE-scoped
in scheduler.php, unavailable in the partnership tab context).
Add .catch() handlers so network/parse errors surface as alerts.
include/monitor.php: vv_fallback_state() now returns:
enabled, check_interval, handback_strikes, handback_strikes_required,
partnership_suspended, partner_lost_at, partnership_required,
partnership_suspend_after — all read from state file + conf vars.
pages/monitor.php: fallback card render rebuilt:
Disabled: clear message with how to enable
Suspended: partnership inactive with elapsed time
FAILOVER: outage duration + T1/T2/T3/T4 tier badges (active=green,
pending=dark) + handback strike progress dots (●●○) when remote
comes back and strikes are counting
NO_INTERNET/DARK: short contextual line
NORMAL: quiet "monitoring · 30s · partnership gated" meta line
Accent border: disabled/suspended → warn, NORMAL → ok, FAILOVER → err
End users leave GITEA_REPO_PATH="" in master.conf (template default).
Before hitting any Gitea detection logic, the script now checks for this
and does git pull --ff-only origin main directly — origin is already
GitHub since the .plg cloned from there.
Sparse checkout skipped on this path: conf files are gitignored so
nothing sensitive is in the repo to exclude.
Developer path (GITEA_REPO_PATH configured) is completely unchanged.
unraid_api.php: track key_missing separately from general fallbacks.
vv_api_data() sets key_missing=true when HOST*_UNRAID_API_KEY is empty.
vv_api_get_status() includes key_missing in the status payload.
monitor.php: two distinct banner states instead of one orange warning.
key_missing → subtle dark/grey note: "API key not configured — add
HOST1_UNRAID_API_KEY in Scheduler → host conf to enable enhanced monitoring"
key present but unreachable → existing orange ⚠ with fallback list.
No banner at all when API is working correctly.
Plugin/varaverk.plg:
- Add support="https://github.com/FailedProxy/Varaverk/issues"
- Install completion log now says "open Varaverk to complete setup"
with navigation hint — user lands on wizard automatically
Plugin/unraid/VaraverkSettings.page:
- Fix stale SCRIPTS_DIR default (unraid_scripts → Varaverk)
- Add GitHub / Issues / Changelog links at bottom of settings page
Plugin/unraid/Varaverk.page:
- Small "⎋ GitHub" link right-aligned in the tab bar
links to github.com/FailedProxy/Varaverk in a new tab
After Step 8 (arr bootstrap), owner calls vv_push_master_conf() and
vv_push_setup_state() via php -r. SSH is established at this point so
the probe passes and all listed hosts get the authoritative master.conf
immediately — no manual save required.
Skipped if onboard failed, dry-run mode, or php unavailable (with
fallback instruction). Result shown in onboard summary as Step 9.
Fix 1 — Monitor partner card (common.php + monitor.php):
vv_remote_hosts_stats() no longer skips hosts with no API key.
Returns no_api_key:true entry instead. Monitor JS renders
"API key not configured — complete Onboard to enable" instead
of a blank space.
Fix 2 — rawconf push not alarming pre-onboard (config.php + scheduler.php):
Probe failures (Tailscale not found, plugin not installed) now carry
ready:false. JS treats ready:false results silently — button shows
"✓ Saved" not "push failed: HOST2" before SSH is set up.
Only genuine post-onboard failures (ready not false) show as errors.
Fix 3 — Partnership Onboard button (partnership.php):
Disabled with tooltip when no partner hostname is in master.conf.
When partner configured but not onboarded, adds explanation note:
"Onboard will generate your SSH key, exchange it with the partner..."
No partner configured: "Edit master.conf and set HOST2."
scheduler.php: after host1.conf save in setup mode, redirect to
?tab=partnership&vv_onboard=1 instead of Monitor.
HOST2+ still redirects to Monitor (they don't manage the partnership).
partnership.php: detects vv_onboard=1 URL param after actions render.
Adds pulse animation + box-shadow to the Onboard button and scrolls
it into view. One-shot — gone when user navigates away.
Varaverk.page: also shows wizard when local host.conf is missing
(handles master.conf pushed by HOST1 before HOST2 installs plugin).
pages/setup.php: three wizard flows
- Standard: blank master.conf, fill hostnames, redirect to scheduler
- Host2/state file: state file detected, pull master.conf from HOST1 via SSH
- Conf-only: master.conf already filled (was pushed), just create local host.conf
api/setup.php:
- save action: writes master.conf + host.conf, creates varaverk_setup.db state file,
redirects to ?tab=scheduler&vv_setup=master.conf
- pull action: resolves HOST1 Tailscale IP, queries HOST1 SCRIPTS_DIR, SCPs
master.conf, creates local host.conf, redirects to ?tab=scheduler&vv_setup=hostN.conf
include/config.php: vv_setup_state_read/write/push helpers.
vv_push_setup_state() pushes varaverk_setup.db to /boot/config/ on all known
remotes — no plugin-readiness probe needed (flash is always accessible).
api/rawconf.php: calls vv_push_setup_state() alongside master.conf push.
pages/scheduler.php: setup mode via ?vv_setup=<conf> URL param.
Auto-opens the specified conf file on page load (DOMContentLoaded).
vvSaveRawConf: in setup mode, skips confirm dialog and forces sequence:
master.conf save → auto-open hostN.conf
hostN.conf save → redirect to Monitor (setup complete)
Plugin/varaverk.plg: URL updated to github.com/FailedProxy/Varaverk
Configurations/host.conf.template:
Full host conf structure with HOSTN/hostn placeholders.
All personal values blank, all sections documented.
Covers identity, rsync, docker, fallback, media, monitors,
transcodes, arrs, system watchdog, resource manager.
Varaverk.page: checks if HOST1 is blank before rendering tabs.
If blank → shows setup wizard, returns early (tabs never render).
pages/setup.php: first-run wizard UI.
Auto-populates hostname from hostname -s.
Role selection: primary (HOST1) or partner (HOST2+).
Partner slot selector for HOST3+.
api/setup.php: handles wizard form POST.
Writes HOST1/HOST2 (and HOST3+) into master.conf preserving all
other content. Creates host*.conf from template with HOSTN/hostn
replaced and SSH key path pre-filled from hostname convention.
Never overwrites an existing host*.conf.
Plugin/varaverk.plg:
- Method="install update": git clone (fresh) or pull (update)
Validates Unraid, checks array is started via shfs mount, clones
to SCRIPTS_DIR (read from varaverk.cfg, default /mnt/user/appdata/Varaverk),
creates Plugin/unraid symlink, inits varaverk.cfg, bootstraps master.conf
from template on first install.
- Every boot: lightweight boot.sh recreates symlink if missing (no git ops).
- Method="remove": removes web symlink, leaves appdata intact.
Configurations/master.conf.template:
- Full master.conf with personal values blanked: HOST1/HOST2 empty,
GITEA_REPO_PATH empty, personal container names in profiles cleared,
FALLBACK_ENABLED=false, CRITICAL/DAILY rsync defaults corrected to true.
New users fill in HOST1, HOST2, then proceed to partnership setup.
Single SSH probe per remote checks all three conditions in one call:
- plugin cfg exists (varaverk.cfg present with SCRIPTS_DIR)
- Configurations/ dir exists at that path
- master.conf already present on remote
Any failure skips that host entirely rather than pushing blind.
Uses the discovered SCRIPTS_DIR as the SCP destination, not ours.
Instead of assuming the remote uses the same appdata path as the local
host, SSH-grep their varaverk.cfg first and SCP to their actual
Configurations/ dir. Falls back to /mnt/user/appdata/Varaverk if the
plugin isn't installed or the file can't be read.
vv_push_master_conf() in config.php: finds all remote HOST* entries,
resolves Tailscale IPs, SCPs master.conf to each.
rawconf.php calls it after a successful write when file=master.conf.
Scheduler save button shows sync status: "✓ Saved · synced to HOST2"
or "✓ Saved · push failed: HOST2" on error.
Also fix path bug in partnership_transfer.sh — was SCPing to
appdata root instead of Configurations/.
VaraverkSettings.page (Settings → Other Settings) now owns SCRIPTS_DIR.
The inline Advanced-mode field and vvSaveSettings() in the Scheduler tab
were a second path to the same write — removed.
Discover all HOST*_TRANSCODE_SERVERS from every configured host.
For remote hosts, rewrite localhost/127.0.0.1 in the URL to their
Tailscale IP (via resolve_tailscale_ip). Unreachable hosts are
warned and skipped — partial sync continues for reachable servers.
Adding a new host needs no script changes — just HOST*_TRANSCODE_SERVERS
in the new host conf.
Removed from DAILY_MAINTENANCE_SCRIPTS — critical orch already covers it
at a much tighter cadence. Play state stays in sync within 30 minutes of
any watched/resume activity on either server.
play_state_sync.sh:
- Add detect_hosts() call so TRANSCODE_SERVERS alias is populated
- Switch MEDIA_SERVERS → TRANSCODE_SERVERS (correct array name from host*.conf)
- Fix malformed jq fallback in combine step (was {"} now handled with if/else)
- Skip placeholder API keys in _add_server
load_config.sh:
- Replace 'for x in $(ls glob)' with 'while read < <(printf glob | sort)'
so paths with spaces (e.g. dev workspace) don't get word-split
Syncs played/resume state bidirectionally across all configured Emby
and Jellyfin servers. Newest LastPlayedDate wins; users matched by
name (case-insensitive); unmatched users skipped cleanly.
Matching: IMDb/TMDB for movies, TVDB+s/e for episodes, MusicBrainz
track ID for audio. Also syncs resume positions for partial plays.
Config: PLAY_SYNC_ENABLED, PLAY_SYNC_DAYS (default 90), PLAY_SYNC_TYPES.
Modes: --dry-run, --status, --full (ignore day window), --log.
Wired into DAILY_MAINTENANCE_SCRIPTS after arr cleanup.
- Tools and Custom: args input always visible (translucent at rest, full on hover)
- Orch children: args input hidden when orch is on, shown when orch is off
(same toggle as the cron field — orch off = standalone mode)
- vvRunJob/vvDryRun: pick up .vv-script-args value, POST as extra_args
- run.php / dryrun.php: accept extra_args, validate against shell metacharacters,
append to run_job.sh invocation (flows through SCRIPT_ARGS to the script)
- CSS: .vv-script-args — 30% opacity at rest, 100% on hover/focus
Default still removes only dangling (untagged) images.
--all removes stopped containers first, then all images not used
by any running container — clears tagged orphan images left behind
by removed or stopped apps.
