display: our workspace is /boot/config/plugins/varaverk, do not co author anything unless i say so,,, we have data from the last claude install /boot/config/claude and /boot/config/claude-bin

project: /root


display:
our workspace is /boot/config/plugins/varaverk, do not co author anything unless i say so,,, we have data
  from the last claude install /boot/config/claude and /boot/config/claude-bin


display: check if claude_startup.sh is set up correctly


display: check /plugin/varaverk check host.conf and master.conf . make sure varaverk is running from boot not appdata


display: save exactly where we are for when i get back


display: One thing to be aware of: /boot is still on USB flash (flash/boot), thats why it installs on appdata first, then during setup wizard it can be selected as normal or internal boot true,


display: lets make sure intitial run and migration still setup this way...


display: yes, i thought i had a selection early in the wizard for this.. but could still have it auto, and have the aselection.


display: now if internal boot is detected it stays there right


display: ok, so now .confs are correct. it got so messed up last night. i think we should scan all scripts and make sure all vars in .confs are there and correct not stale


display: so a missunderstanding last night from what i asked to do caused some issues that have gitea push new templates to replace my .confs. all should vbe good now. but lets double check that i fixed the issue, what happened was i have .conf template under deployment and in configuations. it was always in config, but when we stated to work on initial startup, for some reason it got put there and was the current. i asked to have them only in config and make sure all scripts are pointing to the correct path, wich should just be the loader and stuff. now i want to make sure initial run, from the start of the install works as expected


display: ok, now gitea will not push a new template at 1am?


display: i woke up to varaverk broken this morning and that change last night..... gitea didnt line up with my host1.conf and master.conf, so it rm them and added a fresh template... wich broke a running system


display: push it , no coauthor unless i specify


display: now make sure host2.conf has the same auth stack section


display: ok lets make sure the daily git pull won't break anything else


display: so right now disk 10 is gone, i have a replacement coming sorta. but in monitor page parity is shown as invalid. parity is still valid and disk is being emulated. we need to turn the bar red on disks that fail. parity is valid, we can state enumerating disk*, or somthing but not invalid


display: well this disk never liked being worked hard when around 80%. so i got another to move music to and leave this disk as one of the tv show disks until it accually dies


display: i have daul parity, im ok for another failure


display: it only does it when its 80% or so full and extream writes. outside of that its fine


display: play state has been syncing the same episodes?


display: how far back are we going... i see shameless in jf didnt update even thjough ive watcdhed a bunch in emby


display: lets allow total sync. no max limit


display: up for a big task?

type: text

content:
HOST1_PARTNERSHIP_ARR_STACK=(
        # "my-Sonarr.xml"
        # "my-Radarr.xml"
        # "my-Lidarr.xml"
        # "my-Prowlarr.xml"
        # "my-Bazarr.xml"
    )


display: ok, so all my core code is set to be universal, able to run on any linux. except onboarding. there is unraid specific things that need to end up in the unraid wrapper/app layer...dont do anything yet. we also need to add a section for shared services like emby,etc


display: [Pasted text #2 +3 lines] continue this please

content:
● Background command "Run play state sync with null-date fix" completed (exit code 0)

  Read 1 file
Interrupted · What should Claude do instead?


display: share service would go under [Pasted text #3 +3 lines], and its initial mesh connection


display: shared service would go under [Pasted text #4 +42 lines], then onboarding is initial connection to the mesh in the partnership connection. it connects the nodes, and installs the auth stack, arrs stack, and i need shared services stack. emby, jellyfin, seerr. etc


display: so read the patnership folder, we will update and add the shared services first. then when all is good we will discuss on how to move foreward


display: ok so now we have auth,arrs,and shared services that get pushed to mirrors during onboarding


display: now this is in the core code. all bash scipts are core code. i need unraid specific removed and added to the app layer. the app layer calls on the core code and is gbuilt for specif os's. this one is unraid. next might be trunas, who knows


display: gitea is no longer involved. deployment is with github and handled else where


display: leave it alone im using it for dev, but not in release


display: how do we make this work with oyher systems. goal was to have plugins/adapters. upon install os is detected and points to the correct folder in plugins.... nothing can really be hard coded right.... just thinking outloud


display: lets do it.... ive gotton close to the cor scipts being universal, then app layer and adpaters make everything work.. long term goal is running on other distros, and being able be cross comunicate truas and unraid and say ubuntu......


display: so, cores are now dynamic, calling the adapters?


display: since you don't have a mixed-platform pair yet. this is a very long ways away, it was just a thought that kinda turned into a 5-10 year goal


display: ok, i mean now is the time, we are already here and in the mindset, everything is good


display: host*.confs get stores obsecurely in memory. so we have all .conf of all nodes that are onboarded


display: started as 1 scripts with like 3 lines, then 60 stand alone scripts between 2 servers, then git and started the shared common and confs, ported all ols scripts, then the ecosystem showed me what all i could do now....... now we are seperating to prepare for future cross os node for the mesh network veraverk


display: well. i built the server just for media, then moved my whole cloud here, emby, immich, vaultwarden, nextcloud........... then got into distro hopping as i hated windows.. so i found that if i made a service/ individual docker container for everything i used. then distro testing was quick as i lived in the browser for everything. and its been great. i have been writing this project on my gpd win5 but the server is doing all the work.. i jump to cachy os and 30 minuets later im fully customized and up and running like i never did anything... im sorta applying that here.. i may not end up staying with unraid, but i want my stack. so this is my way of server distro hopping, minimal setup and my whole stack is running as it was


display: what else is still hardcoded that shouldn't be


display: yeah, i was against having other server host.conf on other servers, but this isnt enterprise, and only for you and some friends, people you trust, or youre own multiple machines. so hosts .conf sync to memory slightly hidden. can be found but ther would be some digging. this is not for strangers, i mean you are already sharing a deep level of your system anyways. the memory trick allowed this all to become easier and faster with less callin out


display: anything else left behind that belongs in the adapter


display: yes, this is just kinda polishing before first github push so we are going through a lot of needed corrections now


display: lets go through each bash script and check that the script does what the header says it does


display:
monitor page, Transcode
No transcode state — ramdisk_setup.sh not yet run. what caused this, daily orch?


display: lets use the updated headers and check the read mes and manuals to see if corrections are needed


display: during onboard we need to run the docker network script to ensure the custom netork is there before containers get installed


display: ok now daily and weekly ran. no containers were updated


display: no half the containers need updates and were not touched, this system has been running unraid for 5 or 6 years


display: so we have 2 update scripts do we need both or can we condense down to one, maybe with a extra arg or 2


display: [Pasted text #1 +14 lines], what does weekly use

content:
docker_update.sh
#     Normal mode — pull latest images for DAILY_RESTART_CONTAINERS
#
# docker_update.sh --remainder
#     Remainder mode — pull all running containers not in managed lists,
#     restart those that received updates, prune dangling images
#
# docker_update.sh --dry-run
#     Preview which containers would be pulled without making changes
#
# docker_update.sh --status
#     Show configuration and container list for current mode
#
# docker_update.sh --log
#     Verbose per-container pull and comparison output


display: ok, now doesnt remainder catch one specifically not in daily or weekly?


display: ok, so at the time i didnt have a monthly orch... daily needs to update its containers, weekly its containers and we need to move remainder to montly


display: [Pasted text #1 +23 lines], again what does weekly call? does it get its own arg to know to read the weekly array?

content:
# ==============================================================================================
# RUNTIME MODES
# ==============================================================================================
#
# docker_update.sh
#     Normal mode — pull latest images for DAILY_RESTART_CONTAINERS
#     Called by daily_sync_maintenance.sh before docker_daily_restart.sh
#
# docker_update.sh --remainder
#     Remainder mode — pull all running containers not in managed lists,
#     restart those that received updates, prune dangling images
#     Called by monthly_maintenance.sh
#
# docker_update.sh --dry-run
#     Preview which containers would be pulled without making changes
#
# docker_update.sh --status
#     Show configuration and container list for current mode
#
# docker_update.sh --log
#     Verbose per-container pull and comparison output
#
# ==============================================================================================


display: ok somthing is going on with thranscoding, [Pasted text #1 +201 lines]


display: no, i didnt catch direct play i seldomly have all direct play. also assumed that live tv reguardless used the ramdisk


display: its working i forced transcode in a jf stream, really never have that many direct, i always have at least 1 transcoding


display: lets add that tou our transcoding card in the monitors page


display: [Pasted text #1 +6 lines] slskd - connection check is blank

content:
━━━ 🔄 slskd — Connection Check ━━━

━━━ 🔍 slskd — Stuck Searches ━━━
🏁  [OK]    Searches: 29 cleared, 0 failed

━━━ 🔍 slskd — Dead Transfer Records ━━━
🏁  [OK]    Transfers: 0 cleared, 3 skipped (active/empty), 0 failed


display: ok, thats what we were doing last week. we were going through all scripts correcting for verbose...... lets go through and check echo vs log... goal clean informative no verbose, and all details verbose. i know we got a few folders done, cant remember wich ones