#!/bin/bash
# ==============================================================================================
# ============================= Conf Auto-Populate =============================================
# ==============================================================================================
#
# PURPOSE
# ─────────────────────────────────────────────────────────────────────────────
# Reads credentials and settings from locally running services and writes
# them into the local host conf. Safe to run multiple times — only populates
# EMPTY fields, never overwrites existing values unless --overwrite is passed.
#
# After populating, pushes the updated conf to all partners via conf_sync.sh
# so they have the fresh keys in their /tmp/.vv/ cache immediately.
#
# ==============================================================================================
# AUTO-DETECTED FIELDS
# ==============================================================================================
#
#   HOSTN_OWNER               from hostname (strip unRAID- prefix, lowercase)
#   HOSTN_RADARR_API_KEY      from Radarr config.xml (found via docker volume mount)
#   HOSTN_RADARR_URL          from Radarr config.xml port
#   HOSTN_SONARR_API_KEY      from Sonarr config.xml
#   HOSTN_SONARR_URL          from Sonarr config.xml port
#   HOSTN_LIDARR_API_KEY      from Lidarr config.xml
#   HOSTN_LIDARR_URL          from Lidarr config.xml port
#   HOSTN_RADARR_MOVIE_ROOT   from Radarr rootFolder API
#   HOSTN_SONARR_TV_ROOT      from Sonarr rootFolder API
#   HOSTN_LIDARR_MUSIC_ROOT   from Lidarr rootFolder API
#   HOSTN_SABNZBD_API_KEY     from sabnzbd.ini
#   HOSTN_SABNZBD_URL         from sabnzbd.ini port
#   HOSTN_SLSKD_API_KEY       from slskd config.yml
#   HOSTN_SLSKD_URL           from slskd config.yml port
#   HOSTN_QBIT_URL            from qBittorrent.conf WebUI port
#   HOSTN_QBIT_USERNAME       from qBittorrent.conf WebUI username
#   HOSTN_QBIT_PASSWORD       from qBittorrent.conf WebUI password (plaintext only)
#   HOSTN_EMBY_CONTAINER      fuzzy match from docker ps
#   HOSTN_EMBY_URL            from docker port binding
#   HOSTN_JELLYFIN_CONTAINER  fuzzy match from docker ps
#   HOSTN_JELLYFIN_URL        from docker port binding
#   HOSTN_TRANSCODE_SSD       from Emby/Jellyfin container /transcode volume mount
#   HOSTN_SYS_WATCHDOG_NIC   from ip route default gateway interface
#
# ==============================================================================================
# RUNTIME MODES
# ==============================================================================================
#
#   conf_populate.sh              Populate empty fields only
#   conf_populate.sh --overwrite  Overwrite all detected fields (re-sync after arr key rotation)
#   conf_populate.sh --dry-run    Show what would be written, no changes
#   conf_populate.sh --log        Verbose output
#   conf_populate.sh --no-push    Skip pushing to partners after update
#
# ==============================================================================================

SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
source "$SCRIPT_DIR/../../../load_config.sh"
SCRIPTS_ROOT="$SCRIPTS_DIR"

OVERWRITE=false
NO_PUSH=false
FILTERED_ARGS=()
for arg in "$@"; do
    case "$arg" in
        --overwrite) OVERWRITE=true ;;
        --no-push)   NO_PUSH=true ;;
        *)           FILTERED_ARGS+=("$arg") ;;
    esac
done
parse_args "${FILTERED_ARGS[@]}"
detect_hosts

[[ "$EUID" -ne 0 ]] && { error "Must be run as root"; exit 1; }

CONF_FILE="$SCRIPTS_ROOT/Configurations/${MY_ID,,}.conf"
[[ ! -f "$CONF_FILE" ]] && { error "Conf file not found: $CONF_FILE"; exit 1; }

log "$ICON_GEAR Config: conf=${CONF_FILE} overwrite=${OVERWRITE:-false} no-push=${NO_PUSH:-false}"

UPDATED=0
SKIPPED=0

echo ""
echo "━━━ $ICON_GEAR Conf Auto-Populate — $MY_ID ($LOCAL_SERVER_NAME) ━━━"
echo ""
[[ "$DRY_RUN"   == true ]] && warn "DRY RUN — no changes will be made"
[[ "$OVERWRITE" == true ]] && warn "OVERWRITE mode — existing values will be replaced"

# ── Helper: write a var into conf if empty (or --overwrite) ──────────────────
_set_conf_var() {
    local var_name="$1" value="$2" label="$3"
    [[ -z "$value" ]] && return

    local current
    current=$(grep -oP "(?<=^\s*${var_name}=\")[^\"]*" "$CONF_FILE" 2>/dev/null | head -1)

    if [[ -n "$current" ]] && [[ "$OVERWRITE" == false ]]; then
        log "$label: already set (${current:0:8}…) — skipping"
        (( SKIPPED++ ))
        return
    fi

    if [[ "$DRY_RUN" == true ]]; then
        warn "DRY RUN — would set $var_name = ${value:0:8}…"
        return
    fi

    if grep -q "^\s*${var_name}=" "$CONF_FILE"; then
        sed -i "s|^\(\s*${var_name}\s*=\s*\)\"[^\"]*\"|\1\"${value}\"|" "$CONF_FILE"
    else
        printf '\n    %s="%s"\n' "$var_name" "$value" >> "$CONF_FILE"
    fi
    info "$label: set ✅"
    (( UPDATED++ ))
}

# ── Helper: find arr config dir via docker volume mount ───────────────────────
_arr_config_dir() {
    local pattern="$1"
    local container_name
    container_name=$(docker ps -a --format '{{.Names}}' 2>/dev/null | grep -im1 "^${pattern}")
    [[ -z "$container_name" ]] && return 1

    local config_path
    config_path=$(docker inspect "$container_name" 2>/dev/null | \
        jq -r '.[0].Mounts[]? | select(.Destination == "/config") | .Source' 2>/dev/null | head -1)
    [[ -z "$config_path" ]] && config_path="${DOCKER_APPDATA_BASE:-/mnt/user/appdata}/${container_name}"

    [[ -d "$config_path" ]] && echo "$config_path" || return 1
}

# ── Helper: read XML tag value ────────────────────────────────────────────────
_xml_val() {
    local file="$1" tag="$2"
    grep -oP "(?<=<${tag}>)[^<]+" "$file" 2>/dev/null | head -1
}

# ── Helper: get host-side port for a container's internal port ────────────────
_docker_host_port() {
    local container="$1" container_port="$2"
    docker inspect "$container" 2>/dev/null | \
        jq -r --arg p "${container_port}/tcp" \
        '.[0].NetworkSettings.Ports[$p]?[0].HostPort // empty' 2>/dev/null | head -1
}

# ── Helper: get host path for a container destination mount ──────────────────
_docker_volume_host() {
    local container="$1" dest="$2"
    docker inspect "$container" 2>/dev/null | \
        jq -r --arg d "$dest" \
        '.[0].Mounts[]? | select(.Destination == $d) | .Source' 2>/dev/null | head -1
}

# ==============================================================================================
# ── Owner short name ──────────────────────────────────────────────────────────────────────────
# ==============================================================================================

owner=$(echo "$LOCAL_SERVER_NAME" | sed 's/^[Uu][Nn][Rr][Aa][Ii][Dd]-//i' | tr '[:upper:]' '[:lower:]')
_set_conf_var "${MY_ID}_OWNER" "$owner" "Owner short name"

# ==============================================================================================
# ── Arr API keys + URLs + root paths ─────────────────────────────────────────────────────────
# ==============================================================================================

for arr in radarr sonarr lidarr; do
    arr_upper="${arr^^}"
    config_dir=$(_arr_config_dir "$arr") || {
        log "${arr_upper}: no running container found — skipping"
        continue
    }
    config_xml="${config_dir}/config.xml"

    if [[ ! -f "$config_xml" ]]; then
        log "${arr_upper}: config.xml not found at $config_xml — skipping"
        continue
    fi

    key=$(_xml_val "$config_xml" "ApiKey")
    port=$(_xml_val "$config_xml" "Port")
    port="${port:-$(case $arr in radarr) echo 7878;; sonarr) echo 8989;; lidarr) echo 8686;; esac)}"
    url_base="http://localhost:${port}"

    _set_conf_var "${MY_ID}_${arr_upper}_API_KEY" "$key"      "${arr_upper} API key"
    _set_conf_var "${MY_ID}_${arr_upper}_URL"     "$url_base" "${arr_upper} URL"

    if [[ -n "$key" ]]; then
        case "$arr" in lidarr) api_ver="v1" ;; *) api_ver="v3" ;; esac
        root_json=$(curl -sf --max-time 5 \
            -H "X-Api-Key: $key" "${url_base}/api/${api_ver}/rootfolder" 2>/dev/null)
        root_path=$(echo "$root_json" | jq -r '.[0].path // empty' 2>/dev/null)

        case "$arr" in
            radarr) _set_conf_var "${MY_ID}_RADARR_MOVIE_ROOT" "$root_path" "Radarr movie root" ;;
            sonarr) _set_conf_var "${MY_ID}_SONARR_TV_ROOT"    "$root_path" "Sonarr TV root"    ;;
            lidarr) _set_conf_var "${MY_ID}_LIDARR_MUSIC_ROOT" "$root_path" "Lidarr music root" ;;
        esac
    fi
done

# ==============================================================================================
# ── SABnzbd API key + URL ─────────────────────────────────────────────────────────────────────
# ==============================================================================================

sab_dir=$(_arr_config_dir "sabnzbd") && {
    sab_ini=$(find "$sab_dir" -maxdepth 2 -name "sabnzbd.ini" 2>/dev/null | head -1)
    if [[ -f "$sab_ini" ]]; then
        sab_key=$(grep -oP  '(?<=^api_key\s*=\s*)\S+'  "$sab_ini" 2>/dev/null | head -1)
        sab_port=$(grep -oP '(?<=^port\s*=\s*)\d+'     "$sab_ini" 2>/dev/null | head -1)
        _set_conf_var "${MY_ID}_SABNZBD_API_KEY" "$sab_key"                        "SABnzbd API key"
        _set_conf_var "${MY_ID}_SABNZBD_URL"     "http://localhost:${sab_port:-8080}" "SABnzbd URL"
    fi
}

# ==============================================================================================
# ── slskd API key + URL ───────────────────────────────────────────────────────────────────────
# ==============================================================================================

slskd_dir=$(_arr_config_dir "slskd") && {
    slskd_yml=$(find "$slskd_dir" -maxdepth 2 \( -name "*.yml" -o -name "*.yaml" \) 2>/dev/null | head -1)
    if [[ -f "$slskd_yml" ]]; then
        slskd_key=$(grep -oP '(?<=api_key:\s)[\w-]+'  "$slskd_yml" 2>/dev/null | head -1)
        [[ -z "$slskd_key" ]] && \
            slskd_key=$(grep -oP '(?<=apikey:\s)[\w-]+' "$slskd_yml" 2>/dev/null | head -1)
        slskd_port=$(grep -oP '(?<=port:\s)\d+' "$slskd_yml" 2>/dev/null | head -1)
        _set_conf_var "${MY_ID}_SLSKD_API_KEY" "$slskd_key"                          "slskd API key"
        _set_conf_var "${MY_ID}_SLSKD_URL"     "http://localhost:${slskd_port:-5030}" "slskd URL"
    fi
}

# ==============================================================================================
# ── qBittorrent URL + credentials ────────────────────────────────────────────────────────────
# ==============================================================================================

qbit_dir=$(_arr_config_dir "qbittorrent") && {
    qbit_conf=$(find "$qbit_dir" -maxdepth 3 -name "qBittorrent.conf" 2>/dev/null | head -1)
    if [[ -f "$qbit_conf" ]]; then
        qbit_port=$(grep -oP '(?<=WebUI\\Port=)\d+'    "$qbit_conf" 2>/dev/null | head -1)
        qbit_user=$(grep -oP '(?<=WebUI\\Username=)\S+' "$qbit_conf" 2>/dev/null | head -1)
        # Only capture plaintext password — PBKDF2 hashes are not usable
        qbit_pass=$(grep -oP '(?<=WebUI\\Password=)[^\r\n]+' "$qbit_conf" 2>/dev/null | \
            grep -v '@ByteArray' | head -1)
        _set_conf_var "${MY_ID}_QBIT_URL"      "http://localhost:${qbit_port:-8080}" "qBittorrent URL"
        _set_conf_var "${MY_ID}_QBIT_USERNAME" "$qbit_user"                          "qBittorrent username"
        _set_conf_var "${MY_ID}_QBIT_PASSWORD" "$qbit_pass"                          "qBittorrent password"
    fi
}

# ==============================================================================================
# ── Media server container names + URLs + transcode path ─────────────────────────────────────
# ==============================================================================================

transcode_dir=""

for pattern in "emby" "jellyfin"; do
    container=$(docker ps -a --format '{{.Names}}' 2>/dev/null | grep -im1 "^${pattern}")
    [[ -z "$container" ]] && continue

    case "$pattern" in
        emby)
            host_port=$(_docker_host_port "$container" "8096")
            _set_conf_var "${MY_ID}_EMBY_CONTAINER" "$container"                              "Emby container name"
            _set_conf_var "${MY_ID}_EMBY_URL"       "http://localhost:${host_port:-8096}"     "Emby URL"
            ;;
        jellyfin)
            host_port=$(_docker_host_port "$container" "8096")
            _set_conf_var "${MY_ID}_JELLYFIN_CONTAINER" "$container"                          "Jellyfin container name"
            _set_conf_var "${MY_ID}_JELLYFIN_URL"       "http://localhost:${host_port:-8095}" "Jellyfin URL"
            ;;
    esac

    # Transcode path: first container with a /transcode mount wins
    if [[ -z "$transcode_dir" ]]; then
        transcode_dir=$(_docker_volume_host "$container" "/transcode")
    fi
done

[[ -n "$transcode_dir" ]] && \
    _set_conf_var "${MY_ID}_TRANSCODE_SSD" "${transcode_dir%/}/" "Transcode SSD path"

# ==============================================================================================
# ── Network interface ─────────────────────────────────────────────────────────────────────────
# ==============================================================================================

nic=$(ip route show default 2>/dev/null | grep -oP '(?<=dev )\S+' | head -1)
_set_conf_var "${MY_ID}_SYS_WATCHDOG_NIC" "$nic" "Default NIC"

# ==============================================================================================
# ── Summary + push ────────────────────────────────────────────────────────────────────────────
# ==============================================================================================

echo ""
echo "━━━━━ $ICON_SUMMARY Conf Populate Summary ━━━━━"
echo "  Updated: $UPDATED field(s)"
echo "  Skipped: $SKIPPED already set"
echo "  Conf:    $CONF_FILE"
echo "━━━━━━━━━━━━━━━━━━━━━"

if [[ "$UPDATED" -gt 0 ]] && [[ "$DRY_RUN" == false ]] && [[ "$NO_PUSH" == false ]]; then
    echo ""
    info "Pushing updated conf to partners..."
    bash "$SCRIPTS_ROOT/System_Essentials/conf_sync.sh" --push-only "${EXTRA_FLAGS[@]}" || true
fi