Varaverk.page: also shows wizard when local host.conf is missing
(handles master.conf pushed by HOST1 before HOST2 installs plugin).
pages/setup.php: three wizard flows
- Standard: blank master.conf, fill hostnames, redirect to scheduler
- Host2/state file: state file detected, pull master.conf from HOST1 via SSH
- Conf-only: master.conf already filled (was pushed), just create local host.conf
api/setup.php:
- save action: writes master.conf + host.conf, creates varaverk_setup.db state file,
redirects to ?tab=scheduler&vv_setup=master.conf
- pull action: resolves HOST1 Tailscale IP, queries HOST1 SCRIPTS_DIR, SCPs
master.conf, creates local host.conf, redirects to ?tab=scheduler&vv_setup=hostN.conf
include/config.php: vv_setup_state_read/write/push helpers.
vv_push_setup_state() pushes varaverk_setup.db to /boot/config/ on all known
remotes — no plugin-readiness probe needed (flash is always accessible).
api/rawconf.php: calls vv_push_setup_state() alongside master.conf push.
pages/scheduler.php: setup mode via ?vv_setup=<conf> URL param.
Auto-opens the specified conf file on page load (DOMContentLoaded).
vvSaveRawConf: in setup mode, skips confirm dialog and forces sequence:
master.conf save → auto-open hostN.conf
hostN.conf save → redirect to Monitor (setup complete)
Plugin/varaverk.plg: URL updated to github.com/FailedProxy/Varaverk
Configurations/host.conf.template:
Full host conf structure with HOSTN/hostn placeholders.
All personal values blank, all sections documented.
Covers identity, rsync, docker, fallback, media, monitors,
transcodes, arrs, system watchdog, resource manager.
Varaverk.page: checks if HOST1 is blank before rendering tabs.
If blank → shows setup wizard, returns early (tabs never render).
pages/setup.php: first-run wizard UI.
Auto-populates hostname from hostname -s.
Role selection: primary (HOST1) or partner (HOST2+).
Partner slot selector for HOST3+.
api/setup.php: handles wizard form POST.
Writes HOST1/HOST2 (and HOST3+) into master.conf preserving all
other content. Creates host*.conf from template with HOSTN/hostn
replaced and SSH key path pre-filled from hostname convention.
Never overwrites an existing host*.conf.
Single SSH probe per remote checks all three conditions in one call:
- plugin cfg exists (varaverk.cfg present with SCRIPTS_DIR)
- Configurations/ dir exists at that path
- master.conf already present on remote
Any failure skips that host entirely rather than pushing blind.
Uses the discovered SCRIPTS_DIR as the SCP destination, not ours.
Instead of assuming the remote uses the same appdata path as the local
host, SSH-grep their varaverk.cfg first and SCP to their actual
Configurations/ dir. Falls back to /mnt/user/appdata/Varaverk if the
plugin isn't installed or the file can't be read.
vv_push_master_conf() in config.php: finds all remote HOST* entries,
resolves Tailscale IPs, SCPs master.conf to each.
rawconf.php calls it after a successful write when file=master.conf.
Scheduler save button shows sync status: "✓ Saved · synced to HOST2"
or "✓ Saved · push failed: HOST2" on error.
Also fix path bug in partnership_transfer.sh — was SCPing to
appdata root instead of Configurations/.
VaraverkSettings.page (Settings → Other Settings) now owns SCRIPTS_DIR.
The inline Advanced-mode field and vvSaveSettings() in the Scheduler tab
were a second path to the same write — removed.
- Tools and Custom: args input always visible (translucent at rest, full on hover)
- Orch children: args input hidden when orch is on, shown when orch is off
(same toggle as the cron field — orch off = standalone mode)
- vvRunJob/vvDryRun: pick up .vv-script-args value, POST as extra_args
- run.php / dryrun.php: accept extra_args, validate against shell metacharacters,
append to run_job.sh invocation (flows through SCRIPT_ARGS to the script)
- CSS: .vv-script-args — 30% opacity at rest, 100% on hover/focus
PHP architecture:
- Extract common.php from monitor.php — shared system functions (vv_system_info,
vv_memory_breakdown, vv_remote_hosts_stats, disk/GPU/UPS/network/docker/parity, etc.)
now live in one place; monitor.php and watchdog.php both require common.php
- Add unraid_api.php as explicit include (was implicit via config.php chain)
- confform.php: add missing require_once config.php (implicit dep made explicit)
- Delete orphaned pages/docs.php and pages/config.php (absorbed into scheduler)
Watchdog page:
- Add Storage watchdog card (growth + log strikes, baseline age, suppress ceilings)
- Add Network watchdog card (NPM strikes, DDNS domain/container, NPM URL)
- One host per row layout — all 5 watchdog cards equally spaced via inner grid
- Watchdog now uses Unraid API for local system stats; remote nodes with API key
but no SSH get system info from vv_remote_hosts_stats() with api_only flag
- SSH bundle: /proc/meminfo passed as raw section instead of awk-parsed header
fields — fixes RAM showing 0 on remote hosts where awk quoting was unreliable
- vv_wd_local_system() rewritten as thin wrapper over vv_system_info() + vv_memory_breakdown()
Monitor page:
- Watchdog card: add stability strikes, storage watchdog strikes, network NPM status,
live system stats (rootfs/log/tmp %, RAM free, load, CPU temp, zombies, NIC, sshd)
- Row height: switch from max-height on cards to minmax(0, calc(...)) on grid track —
all cards in a row now fill to the tallest card's height correctly (fixes Pools card
being shorter than neighbours)
Scheduler page:
- Add Tools section above Custom Scripts — lists Tools/*.sh with run/dry-run/cron/log
- vv_tools_scripts() function in scheduler.php include
Tools:
- Add docker_prune_images.sh — removes dangling Docker images; --dry-run and --status modes
- Replace pill view with per-container rows showing full detail
- docker inspect batch call: networks+IPs, port mappings, bind mounts
- Container icon from template XML, name links to WebUI if configured
- Network IP badges (blue), port mapping badges (yellow)
- Bind mount paths shown src→dst, collapsible expand for >3 paths
- Large folders (>7 containers) auto-span full width
- Status badge: RUNNING/STOPPED/PAUSED/EXITED with colour
- Stopped containers dimmed, icons load from template XMLs
- Primary store moved to /boot/config/plugins/varaverk/docker_folders.json
- No dependency on folder.view3 plugin being installed
- Auto-imports folder.view3 JSON on first run if it exists (one-time bootstrap)
- Mirrors writes to folder.view3 JSON only if that plugin's directory is present
- Toolbar shows '⇄ folder.view3' badge when sync is active
- New Docker tab (between Scheduler and Watchdog)
- Reads /boot/config/plugins/folder.view3/docker.json — fully compatible with folder.view3 plugin
- Writes changes to both docker.json AND HOST*_DOCKER_FOLDER_MAP in host*.conf simultaneously
- Edit mode: rename folders (inline input), delete folders, move containers via popover picker, create new folders
- Drift banner: highlights containers where conf desired state doesn't match json actual state
- Sync conf→JSON: apply conf desired state to json (fixes drift after onboard)
- Sync JSON→conf: capture manual json edits back into conf
- Ungrouped section shows all containers not assigned to any folder
- Onboard scripts can read HOST*_DOCKER_FOLDER_MAP to auto-place new containers
Gmer4Lfe