Both the reader and the writer ran to the first closing paren, which is only the
array's own close if nothing inside contains one. HOST1_WATCHDOG_SCAN_IGNORE has
carried "(exit 127 — bad image)" for weeks: writes spliced into the middle of it
and were refused by bash -n with a bare false, and reads returned the entries
above it — the Rsync tab showed no intermediate scripts at all and 10 of 17
daily. Arrays now close on a ) that starts its own line, as confform already did.
The API mixes units per field — memory in bytes, disk size in KiB, fsSize and
fsUsed in kB — and one helper was guessing which from the magnitude of the
number, which also read any memory total under 100 GB as KB.
A finding nobody is told about is a finding nobody has, and the card added earlier only shows
them to someone who opens the tab. Only needs_operator is announced — an open finding may still
be repaired by the next pass — one notification for all of them, and each is announced once and
stays quiet until the fault changes or gets worse.
vv_notify() hands the message to common.sh's notify() rather than reimplementing the channels,
and calls detect_hosts() explicitly because load_config.sh deliberately does not: without it the
Unraid notification arrives and Discord silently never does. It also reports false when no
channel is switched on at all, since notify() exits 0 either way and a caller believing that
would mark a finding as told and never mention it again.
Notification text is folded to ASCII. Unraid's notifier dropped an em dash outright and left the
double space behind, which was found by sending one and reading what arrived.
All 16 include/ files now carry PURPOSE / DESIGN PRINCIPLES / OPERATIONAL
SAFEGUARDS / EXPORTS / CONFIGURATION, keeping the first three section names
identical to the bash headers so retrieval can route across both languages.
monitor.php read six watchdog state files from /tmp while the watchdogs write
to STATE_DIR, so every strike set came back empty and the summary reported
healthy unconditionally. docs.php gained path containment before it is wired
to a page.
Unraid API returns fsUsed=0 when a disk's filesystem is unmounted (spun
down). disks.ini keeps the last-known value in KB even after spindown —
use it as fallback when isSpinning=false and fsUsed=0. Also remove the
mounted-only guard in the ini fallback path (vv_disk_entry) for the same
reason. Stale comments in user_script_plug-in.sh and partnership_manager.sh
also cleaned up.
Web files now served via symlink to the git repo so git pull changes survive
reboots without rebuilding the txz. Also includes: docker pull/rebuild/restart
with live log streaming, arr_profile_enforcer for Sonarr/Radarr quality
profiles, monitor page cache fix (background writer now in cron), and
ARR_KIDS/SONARR/RADARR profile name vars in master.conf.
Live TV and Direct Stream sessions never appear in the transcoding
session list but do write segments to the ramdisk. Card now shows
the active segment count so the ramdisk usage is explained.
All bash scripts are now platform-neutral. Unraid-specific paths, commands,
and service checks moved to Plugin/unraid/adapter.sh. Core scripts call
platform_*() functions exclusively — no direct OS paths in runtime logic.
New adapter functions: platform_storage_path, platform_webui_install_path,
platform_scripts_dir_probe_cmd, platform_setup_db_path, platform_storage_healthy,
platform_is_service_enabled, platform_get_temp_thresholds, platform_disk_states_path,
platform_rebuild_container, platform_push_conf, platform_push_setup_state,
platform_get_templates_dir, platform_send_os_notification.
Partnership services stack (Emby/Jellyfin/Seerr/SeerrFin) added as third
onboarding stack alongside auth and arr stacks.
- Auth stack: fold cert monitor into Auth Stack page as fourth tab (Certs);
remove standalone cert page and top-level tab
- cert_monitor.sh: write JSON status cache to State_Files/cert_status.json
after each run; expose per-domain days/expiry via _CERT_DAYS/_CERT_EXPIRY globals
- api/cert.php: new — serves cached cert status; falls back to configured
domains as UNKN when no cache exists; POST action=run triggers live check
- arrs db fallbacks: vv_arr_cleanup_stats/discovery_stats/recovery_stats now
read from data/*.db files when log JSON files don't yet exist
- config.php vv_conf_vars(): unescape bash \$ → $ so passwords with dollar
signs read correctly from conf files
- host1.conf: fill in HOST1_NPM_USER/PASS and HOST1_LLDAP_USER/PASS
- Partnership adapter pattern: Unraid-specific container logic extracted to
Plugin/unraid/Partnership/; platform-agnostic structure stays in Partnership/
- First-run wizard: uniform multi-step flow for all hosts; HOST2 pull moved
to checklist; auto SSH keygen and API key creation on save
- api/checklist.php: live setup checklist with pull_master action
- Fullscreen toggle: hide Unraid header/menu; state persists via localStorage
vv_conf_vars() reads conf as text; TRANSCODE_STATE_FILE=$STATE_DIR/... is
returned as a literal string, not expanded. Build path from STATE_DIR directly.
vv_transcode_sessions() was hardcoded to /tmp/transcode_state.db but master.conf
sets TRANSCODE_STATE_FILE=$STATE_DIR/transcode_state.db which resolves to
/boot/config/plugins/varaverk/State_Files/transcode_state.db. Page always showed
"ramdisk_setup.sh not yet run" despite state file being present and populated.
Consolidations (config.php gains 5 shared utilities):
- vv_format_uptime() replaces 4 inline uptime-formatting blocks
- vv_parse_conf_scalar() replaces vv_arr_scalar/vv_wd_scalar/vv_fb_scalar/vv_media_conf_scalar
- vv_known_hosts() replaces vv_arr_known_hosts/vv_fb_known_hosts + inline parser in watchdog
- vv_parse_kv_db() replaces inline key=value parsing in snapshot and monitor
- vv_local_ip() replaces duplicate in docker_folders.php and inline in docker.php
All module-level function names kept as thin aliases so call sites unchanged.
Critical bug fixes:
- api/system.php: added require_once config.php and POST-only guard (no auth on shutdown)
- api/movescript.php + reorderarray.php: use vv_write_conf_raw (atomic) + vv_push_master_conf
- api/snapshot.php: share /tmp/vv_cpu_stat.json with vv_cpu_per_core() instead of own state file
Correctness:
- vv_cpu_per_core() and vv_network_stats(): atomic tmp+rename for state files (concurrent poll safety)
- ext_ip curl cache moved from /tmp/vv_ext_ip.cache to vv_cache_read/write (canonical cache dir)
- monitor_remote.php + board.php + snapshot.php: all use vv_cache_read/write instead of ad-hoc /tmp files
HTTP method guards added to write-only APIs that were missing them:
- api/scheduler.php, conf_toggle.php, flag_toggle.php
disk_io now returns {tr, tw} cumulative GB alongside {r, w} rates.
A centered span in each card h3 shows ↓total ↑total (since last boot),
updating each poll. Helpers updated for the new object format.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds vv_disk_io_rates() — snapshots /proc/diskstats each poll and
computes per-device MB/s. Exposed as disk_io in the monitor API.
JS:
- Per-disk rows: ↓read ↑write inline next to disk name (green/amber, hidden when idle)
- Pool rows: aggregate pool I/O next to pool name
- Array header: total array I/O in the subtitle line
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Parses the last 'Ramdisk freed' and 'SSD freed' values from the transcode
management log and displays them as small ↓XMB annotations inside each tag.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Move SCRIPTS_DIR/DATA_DIR/STATE_DIR from appdata to /boot/config/plugins/varaverk
- All state files now in STATE_DIR (no more /tmp or /boot/config root writes)
- Bootstrap: Gitea-first clone with GitHub fallback, no array dependency
- varaverk.cfg seeded with Gitea connection settings
- .gitignore: add State_Files/, varaverk.cfg, varaverk-*.txz
- Partnership/transcode/fallback scripts use STATE_DIR variables
- PHP config.php: DATA_DIR/STATE_DIR constants, VV_SETUP_STATE_FILE dynamic
- deploy.sh PROD_ROOT updated to plugin flash dir
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Fix 1 — Monitor partner card (common.php + monitor.php):
vv_remote_hosts_stats() no longer skips hosts with no API key.
Returns no_api_key:true entry instead. Monitor JS renders
"API key not configured — complete Onboard to enable" instead
of a blank space.
Fix 2 — rawconf push not alarming pre-onboard (config.php + scheduler.php):
Probe failures (Tailscale not found, plugin not installed) now carry
ready:false. JS treats ready:false results silently — button shows
"✓ Saved" not "push failed: HOST2" before SSH is set up.
Only genuine post-onboard failures (ready not false) show as errors.
Fix 3 — Partnership Onboard button (partnership.php):
Disabled with tooltip when no partner hostname is in master.conf.
When partner configured but not onboarded, adds explanation note:
"Onboard will generate your SSH key, exchange it with the partner..."
No partner configured: "Edit master.conf and set HOST2."
PHP architecture:
- Extract common.php from monitor.php — shared system functions (vv_system_info,
vv_memory_breakdown, vv_remote_hosts_stats, disk/GPU/UPS/network/docker/parity, etc.)
now live in one place; monitor.php and watchdog.php both require common.php
- Add unraid_api.php as explicit include (was implicit via config.php chain)
- confform.php: add missing require_once config.php (implicit dep made explicit)
- Delete orphaned pages/docs.php and pages/config.php (absorbed into scheduler)
Watchdog page:
- Add Storage watchdog card (growth + log strikes, baseline age, suppress ceilings)
- Add Network watchdog card (NPM strikes, DDNS domain/container, NPM URL)
- One host per row layout — all 5 watchdog cards equally spaced via inner grid
- Watchdog now uses Unraid API for local system stats; remote nodes with API key
but no SSH get system info from vv_remote_hosts_stats() with api_only flag
- SSH bundle: /proc/meminfo passed as raw section instead of awk-parsed header
fields — fixes RAM showing 0 on remote hosts where awk quoting was unreliable
- vv_wd_local_system() rewritten as thin wrapper over vv_system_info() + vv_memory_breakdown()
Monitor page:
- Watchdog card: add stability strikes, storage watchdog strikes, network NPM status,
live system stats (rootfs/log/tmp %, RAM free, load, CPU temp, zombies, NIC, sshd)
- Row height: switch from max-height on cards to minmax(0, calc(...)) on grid track —
all cards in a row now fill to the tallest card's height correctly (fixes Pools card
being shorter than neighbours)
Scheduler page:
- Add Tools section above Custom Scripts — lists Tools/*.sh with run/dry-run/cron/log
- vv_tools_scripts() function in scheduler.php include
Tools:
- Add docker_prune_images.sh — removes dangling Docker images; --dry-run and --status modes
Gmer4Lfe