The page multiplies its core count by the RW_LOAD_* multipliers to colour the
load bar, and resource_watchdog.sh computes its real thresholds from nproc. The
page preferred the API's physical core count — 16 against 32 threads — so it
turned amber at load 32 and red at 48 while the watchdog did not reach soft
pressure until 64 or medium until 96. A page whose whole job is reporting what
the watchdogs think was reporting a crisis about a machine they considered idle.
The remote path already sent the partner's own nproc, so both nodes now agree.
Every existing exemption lasts until someone remembers to undo it, and nobody
does — Healarr has sat in a pressure list since it was uninstalled and seven
ignore entries name containers that are gone. A mute states when it ends and
then ends, capped by WATCHDOG_MUTE_MAX_HOURS so temporary is enforced rather
than intended. Applied where IGNORE_MAP is built, so all five check sites
inherit it, and shown with its countdown because an invisible suppression is
the thing being fixed.
Without it the page renders zeros, all-clear pills and green dots when the
orchestrator has stopped entirely — its healthiest appearance describing a
machine with no watchdogs, against a header promising absence is never drawn as
an all-clear. The heartbeat already existed; overdue is measured against the
cron schedule rather than an assumed fifteen minutes.
Half the hard-pressure stop list is containers that are not installed, so at
level 3 it sheds half the memory the card implies. Badged on the lists where a
dead entry costs something and deliberately not on Scan ignore, where ignoring
something already gone is the point — a card of dashed pills by design would
teach the eye to skip the badge where it has to be believed.
The tab collected over SSH on every 30s poll — 8.3s a load with HOST2 down.
vv_parse_conf_scalar() captured to end of line, so a commented toggle parsed as
"true # HOST2 back online": every threshold read right because (int) stops at
the first non-digit, and 38 booleans read wrong. The Fallback tab has been
showing failover disabled while it was on.
All 16 include/ files now carry PURPOSE / DESIGN PRINCIPLES / OPERATIONAL
SAFEGUARDS / EXPORTS / CONFIGURATION, keeping the first three section names
identical to the bash headers so retrieval can route across both languages.
monitor.php read six watchdog state files from /tmp while the watchdogs write
to STATE_DIR, so every strike set came back empty and the summary reported
healthy unconditionally. docs.php gained path containment before it is wired
to a page.
- WEBGUI_PHP_WAIT was referenced by webgui_watchdog.sh but never defined
in master.conf, always silently falling back to a hardcoded default
- arrs.php/confform.php still pointed at Media/ for arr cleanup/discovery
scripts moved to Arrs_Stack/ in b4bc926 — broke the Arrs page's stats
and the per-script settings editor for those scripts
- docker_folders.php read directly from the optional folder.view3 plugin's
file instead of Varaverk's own docker_folders.json (the primary store
since the Docker tab got its own config) — left the Monitor page's
Docker Folders widget empty on any host without folder.view3 installed
- vv_wd_remote_data() read remote watchdog state files from hardcoded
/tmp or /boot/config paths instead of the remote's actual STATE_DIR
(which resolves dynamically and can differ under flash mode) — remote
node's Watchdog panel was always empty; same wrong path also used for
two local reads (system_watchdog_oom.db, watchdog_appdata_growth.db)
- rsync.php referenced a {HOST}_MONTHLY_SYNC_SHARES conf var that never
existed (monthly_maintenance.sh has no rsync section) — nulled out to
match the existing pattern used for the fallback window
- vv_arr_node_names() did a pointless identity array_map
- vv_dk_webui() had its own duplicate local-IP resolution instead of
using vv_local_ip(), despite config.php's comment claiming that exact
duplication was already consolidated
All state/data file paths in scripts and PHP now resolve via STATE_DIR / DATA_DIR /
PERSISTENT_CONF_CACHE instead of hardcoded /boot/config/ or /tmp/ paths, so the
ecosystem works in both internal and appdata storage modes.
PHP layer (watchdog.php, partnership.php, fallback.php, monitor.php, snapshot.php,
config.php): all state reads switched to STATE_DIR constant; remote state reads use
the new vv_remote_state_cmd() helper which resolves the remote's SCRIPTS_DIR via
their varaverk.cfg before building the path.
conf_sync.sh: fixed SCRIPTS_ROOT → SCRIPTS_DIR bug on MY_CONF path; added
_remote_scripts_dir() to resolve partner's SCRIPTS_DIR before SCP pull.
fallback.php page: added controls card (PARTNERSHIP_ENABLED, FALLBACK_ENABLED,
FALLBACK_RSYNC_ENABLED toggles), status grid, and settings card.
README and Manual updated for System_Essentials, Watchdogs, Fallback, Rsync,
Media, Monitors, Orchestrators, Partnership: added new scripts (conf_sync,
conf_cache_save/restore, conf_cache_watchdog, play_state_sync, start_webhook_listener,
upgrade_webhook_handler), corrected all stale /boot/config/ state file paths to
$STATE_DIR/$DATA_DIR, noted webgui/php_fpm/mover/user_scripts scripts moved to
Plugin/unraid/System_Essentials, fixed start_webhook_listener.sh header (Node.js,
not PHP -S).
Consolidations (config.php gains 5 shared utilities):
- vv_format_uptime() replaces 4 inline uptime-formatting blocks
- vv_parse_conf_scalar() replaces vv_arr_scalar/vv_wd_scalar/vv_fb_scalar/vv_media_conf_scalar
- vv_known_hosts() replaces vv_arr_known_hosts/vv_fb_known_hosts + inline parser in watchdog
- vv_parse_kv_db() replaces inline key=value parsing in snapshot and monitor
- vv_local_ip() replaces duplicate in docker_folders.php and inline in docker.php
All module-level function names kept as thin aliases so call sites unchanged.
Critical bug fixes:
- api/system.php: added require_once config.php and POST-only guard (no auth on shutdown)
- api/movescript.php + reorderarray.php: use vv_write_conf_raw (atomic) + vv_push_master_conf
- api/snapshot.php: share /tmp/vv_cpu_stat.json with vv_cpu_per_core() instead of own state file
Correctness:
- vv_cpu_per_core() and vv_network_stats(): atomic tmp+rename for state files (concurrent poll safety)
- ext_ip curl cache moved from /tmp/vv_ext_ip.cache to vv_cache_read/write (canonical cache dir)
- monitor_remote.php + board.php + snapshot.php: all use vv_cache_read/write instead of ad-hoc /tmp files
HTTP method guards added to write-only APIs that were missing them:
- api/scheduler.php, conf_toggle.php, flag_toggle.php
- Move SCRIPTS_DIR/DATA_DIR/STATE_DIR from appdata to /boot/config/plugins/varaverk
- All state files now in STATE_DIR (no more /tmp or /boot/config root writes)
- Bootstrap: Gitea-first clone with GitHub fallback, no array dependency
- varaverk.cfg seeded with Gitea connection settings
- .gitignore: add State_Files/, varaverk.cfg, varaverk-*.txz
- Partnership/transcode/fallback scripts use STATE_DIR variables
- PHP config.php: DATA_DIR/STATE_DIR constants, VV_SETUP_STATE_FILE dynamic
- deploy.sh PROD_ROOT updated to plugin flash dir
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
PHP architecture:
- Extract common.php from monitor.php — shared system functions (vv_system_info,
vv_memory_breakdown, vv_remote_hosts_stats, disk/GPU/UPS/network/docker/parity, etc.)
now live in one place; monitor.php and watchdog.php both require common.php
- Add unraid_api.php as explicit include (was implicit via config.php chain)
- confform.php: add missing require_once config.php (implicit dep made explicit)
- Delete orphaned pages/docs.php and pages/config.php (absorbed into scheduler)
Watchdog page:
- Add Storage watchdog card (growth + log strikes, baseline age, suppress ceilings)
- Add Network watchdog card (NPM strikes, DDNS domain/container, NPM URL)
- One host per row layout — all 5 watchdog cards equally spaced via inner grid
- Watchdog now uses Unraid API for local system stats; remote nodes with API key
but no SSH get system info from vv_remote_hosts_stats() with api_only flag
- SSH bundle: /proc/meminfo passed as raw section instead of awk-parsed header
fields — fixes RAM showing 0 on remote hosts where awk quoting was unreliable
- vv_wd_local_system() rewritten as thin wrapper over vv_system_info() + vv_memory_breakdown()
Monitor page:
- Watchdog card: add stability strikes, storage watchdog strikes, network NPM status,
live system stats (rootfs/log/tmp %, RAM free, load, CPU temp, zombies, NIC, sshd)
- Row height: switch from max-height on cards to minmax(0, calc(...)) on grid track —
all cards in a row now fill to the tallest card's height correctly (fixes Pools card
being shorter than neighbours)
Scheduler page:
- Add Tools section above Custom Scripts — lists Tools/*.sh with run/dry-run/cron/log
- vv_tools_scripts() function in scheduler.php include
Tools:
- Add docker_prune_images.sh — removes dangling Docker images; --dry-run and --status modes
Gmer4Lfe