Put each page's settings on that page

A watchdog threshold was reachable only from the bottom of a list of a hundred
and twenty on another tab.

Plugin/unraid/Tools/ui_map_build.php

@@ -71,8 +71,13 @@ foreach (VV_UI_SECTION_SURFACES as $surface) {
     // "*" is the catch-all, matched the same way api/confform.php matches it. preg_quote would
     // turn it into \* and quietly match nothing, which is how the map went on reporting a third
     // of the conf as unreachable after the page that reaches it had shipped.
+    // Same matching as api/confform.php, including the pipe-separated form — the map and the page
+    // must agree about which sections a surface shows, or the route it prints is fiction.
     $all = ((string) $surface['match'] === '*');
-    $re  = $all ? '' : '/\b' . preg_quote((string) $surface['match'], '/') . '\b/i';
+    $re  = $all ? '' : '/\b(' . implode('|', array_map(
+               fn($w) => preg_quote(trim($w), '/'),
+               array_filter(explode('|', (string) $surface['match']), fn($w) => trim($w) !== '')))
+           . ')\b/i';
     foreach ($sections as $k => $g) {
         $name = (string) $g['subsection'];
         if (isset(VV_UI_SECTION_EXCLUDE[$name])) continue;

Plugin/unraid/api/confform.php

@@ -107,8 +107,14 @@ if ($_SERVER['REQUEST_METHOD'] === 'GET') {
         // with boundaries around it rather than as a pattern a caller could widen to everything.
         // "*" is every section this host has. Deliberately not the same as an empty needle, which
         // would match everything by accident rather than on purpose.
+        // Several words, pipe-separated, each still matched whole and still quoted as a literal.
+        // One word was not enough: the Arr sections are named Arr Sync, Lidarr, Sonarr and
+        // Radarr, and no single stem catches those without also catching "Array Start", which is
+        // the Unraid disk array and nothing to do with them.
         $all = ($match === '*');
-        $re  = $all ? '' : '/\b' . preg_quote($match, '/') . '\b/i';
+        $re  = $all ? '' : '/\b(' . implode('|', array_map(
+                   fn($w) => preg_quote(trim($w), '/'),
+                   array_filter(explode('|', $match), fn($w) => trim($w) !== ''))) . ')\b/i';
         $out = [];
         foreach (vv_get_conf_files() as $f) {
             foreach (vv_conf_all_groups($f) as $g) {

Plugin/unraid/css/varaverk.css

@@ -559,6 +559,35 @@ body.vv-fullscreen #displaybox { padding-left: 1rem !important; padding-top: .5r
                 padding: 3px 8px; border-radius: 3px; cursor: pointer; flex-shrink: 0; }
 .vv-cf-reveal:hover { color: #aaa; border-color: #4a4a4a; }
 
+/* ── The settings card ────────────────────────────────────────────────────────
+   Emitted by vv_conf_ui_card(), so every page that shows settings shows the same object. Lives
+   here rather than in each page's inline block for the reason nine page-private vocabularies
+   existed in the first place: a card defined where it is used is a card that drifts. */
+.vv-cf-card   { background:#161616; border:1px solid #2a2a2a; border-radius:6px;
+                padding:12px 14px; margin-bottom:14px; }
+.vv-cf-card-h { display:flex; align-items:center; gap:10px; cursor:pointer; user-select:none;
+                flex-wrap:wrap; }
+.vv-cf-card-c { color:#333; font-size:9px; transition:transform .12s; }
+.vv-cf-card-h.open .vv-cf-card-c { transform:rotate(90deg); }
+.vv-cf-card-l { font-size:11px; font-weight:700; color:#666; text-transform:uppercase;
+                letter-spacing:.07em; }
+.vv-cf-card-f { max-width:240px; cursor:text; background:#0d0d0d; border:1px solid #2a2a2a;
+                border-radius:3px; color:#bbb; font-size:12px; padding:4px 8px; outline:none;
+                font-family:inherit; }
+.vv-cf-card-f:focus { border-color:#444; }
+.vv-cf-card-s { margin-left:auto; font-size:10px; color:#444; font-family:monospace; }
+.vv-cf-card-s.warn { color:#ffb74d; }
+.vv-cf-card-s.ok   { color:#4caf50; }
+.vv-cf-card-s.bad  { color:#ef5350; }
+.vv-cf-card-save   { background:#1a2a1a; border:1px solid #2d4a2d; color:#4caf50; font-size:11px;
+                     padding:5px 14px; border-radius:3px; cursor:pointer; font-family:inherit; }
+.vv-cf-card-save:hover:not(:disabled) { background:#223a22; }
+.vv-cf-card-save:disabled { opacity:.4; cursor:default; }
+/* Scrolls itself rather than growing the page past the viewport, so Save stays reachable. */
+.vv-cf-card [id$="-fields"] { max-height:60vh; overflow-y:auto; margin-top:10px; padding-right:4px; }
+/* Hidden by the filter, not removed — see the note in VvConfCard. */
+.vv-cf-group.vv-filtered { display:none; }
+
 /* Touched but not yet saved. The row says so itself rather than relying on a Save button
    somewhere else having become enabled. */
 .vv-cf-field.dirty { border-left-color: #6a5228; background: #14110a; }

Plugin/unraid/include/confform.php

@@ -107,6 +107,20 @@ const VV_UI_SECTION_SURFACES = [
         'tab'   => 'AI',
         'route' => 'AI tab → Settings → Configuration',
     ],
+    // Subject pages first, so a setting named after the page you are already on is found there
+    // rather than at the bottom of a list of a hundred and twenty. The catch-all below still
+    // carries all of them, and the map lists both routes because both are true.
+    ['match' => 'watchdog',                 'tab' => 'Watchdog',
+     'route' => 'Watchdog tab → Watchdog settings'],
+    ['match' => 'rsync',                    'tab' => 'Rsync',
+     'route' => 'Rsync tab → Rsync settings'],
+    ['match' => 'fallback|tier',            'tab' => 'Fallback',
+     'route' => 'Fallback tab → Fallback settings'],
+    ['match' => 'arr|sonarr|radarr|lidarr', 'tab' => 'Arrs',
+     'route' => 'Arrs tab → Arr settings'],
+    ['match' => 'docker',                   'tab' => 'Docker',
+     'route' => 'Docker tab → Docker settings'],
+
     // Everything that is not structurally excluded. The catch-all exists so no ordinary setting
     // is reachable only by editing a file — a settings page whose answer to a third of the conf
     // is "open it over SSH" is not a settings page.

Plugin/unraid/include/confui.php

@@ -64,6 +64,42 @@
 // fatals on the one page that included this without it, which is what took the AI tab blank.
 require_once __DIR__ . '/confform.php';
 
+// A whole settings card: disclosure, filter, save, and the fields for one subject. Emitted by a
+// page in one line rather than assembled there.
+//
+// This exists because the alternative was six copies. The AI tab, the Scheduler and the Settings
+// page each grew their own load/filter/dirty/save cycle, and the third one was written by copying
+// the second — which is exactly how this plugin ended up with nine settings vocabularies and six
+// toggles. Everything subtle here is subtle because it already cost something once: the filter
+// hides rather than removes so a pending edit survives it, the save rebases instead of refetching
+// so the field under the cursor does not repaint, and a refused write leaves the row dirty
+// because it genuinely did not happen.
+//
+//   $prefix  composes every id, so a page may hold more than one card
+//   $match   which sections — a whole word matched against section headers, or "*" for all
+//   $title   the card's heading
+function vv_conf_ui_card(string $prefix, string $match, string $title = 'Settings'): void {
+    vv_conf_ui_assets();
+    $p = htmlspecialchars($prefix, ENT_QUOTES);
+    ?>
+<div class="vv-cf-card" id="<?= $p ?>-card">
+  <div class="vv-cf-card-h" id="<?= $p ?>-t">
+    <span class="vv-cf-card-c">▶</span>
+    <span class="vv-cf-card-l"><?= htmlspecialchars($title) ?></span>
+    <input type="text" class="vv-cf-card-f" id="<?= $p ?>-filter"
+           placeholder="filter…" style="display:none">
+    <span class="vv-cf-card-s" id="<?= $p ?>-sum"></span>
+    <button class="vv-cf-card-save" id="<?= $p ?>-save" type="button"
+            style="display:none" disabled>Save</button>
+  </div>
+  <div id="<?= $p ?>-body" style="display:none">
+    <div id="<?= $p ?>-fields"><p class="vv-cf-empty">opens when you do</p></div>
+  </div>
+</div>
+<script>VvConfCard(<?= json_encode($prefix) ?>, <?= json_encode($match) ?>);</script>
+    <?php
+}
+
 function vv_conf_ui_assets(): void {
     static $done = false;
     if ($done) return;
@@ -337,6 +373,100 @@ function vv_conf_ui_assets(): void {
       });
     },
   };
+
+  // One card, self-contained. Everything a page used to write for itself.
+  window.VvConfCard = function (prefix, match) {
+    const $ = s => document.getElementById(prefix + '-' + s);
+    const API = '/plugins/varaverk/api/confform.php';
+    let loaded = false;
+
+    const dirty = () => {
+      const n = VvConfUI.dirtyCount(prefix + '-fields');
+      $('save').disabled = (n === 0);
+      $('sum').textContent = n ? (n + ' unsaved') : '';
+      $('sum').className = 'vv-cf-card-s' + (n ? ' warn' : '');
+    };
+
+    function load() {
+      if (loaded) return;
+      loaded = true;
+      fetch(API + '?sections=' + encodeURIComponent(match))
+        .then(r => r.json())
+        .then(d => {
+          if (!d.ok) throw new Error(d.error || 'could not be read');
+          VvConfUI.render(prefix + '-fields', d.groups || []);
+          VvConfUI.wire(prefix + '-fields', dirty);
+          dirty();
+        })
+        .catch(e => {
+          // Retryable — closing and reopening tries again rather than leaving a permanent error.
+          loaded = false;
+          $('fields').innerHTML = '<p class="vv-cf-empty">could not be read: '
+                                + String(e.message || e) + '</p>';
+        });
+    }
+
+    $('t').addEventListener('click', e => {
+      // The filter and the save live in the header; clicking either must not collapse the card.
+      if (e.target.closest('#' + prefix + '-filter, #' + prefix + '-save')) return;
+      const open = $('body').style.display === 'none';
+      $('body').style.display = open ? '' : 'none';
+      $('t').classList.toggle('open', open);
+      $('filter').style.display = open ? '' : 'none';
+      $('save').style.display   = open ? '' : 'none';
+      // First open only, so collapsing to look at something else does not discard edits.
+      if (open) load();
+    });
+
+    // Hides whole sections, never individual fields — a setting means little without the heading
+    // saying what it belongs to. display:none rather than removal, so a field edited before
+    // filtering is still dirty and still saved: a filter that silently dropped pending edits
+    // would be a data-loss bug wearing a search box.
+    $('filter').addEventListener('input', () => {
+      const q = $('filter').value.trim().toLowerCase();
+      $('fields').querySelectorAll('.vv-cf-group').forEach(g => {
+        g.classList.toggle('vv-filtered', q !== '' && !g.textContent.toLowerCase().includes(q));
+      });
+    });
+
+    $('save').addEventListener('click', () => {
+      const changes = VvConfUI.collect(prefix + '-fields');
+      if (!changes.length) return;
+      $('save').disabled = true;
+      $('sum').textContent = 'saving…';
+      $('sum').className = 'vv-cf-card-s';
+
+      // URLSearchParams, not FormData — a multipart POST to this plugin's endpoints hangs with
+      // no status ever returned.
+      fetch(API, { method: 'POST',
+        headers: { 'Content-Type': 'application/x-www-form-urlencoded; charset=UTF-8' },
+        body: new URLSearchParams({ changes: JSON.stringify(changes) }) })
+        .then(r => r.text())
+        .then(t => {
+          let d;
+          try { d = JSON.parse(t); }
+          catch (_) {
+            throw new Error(t.trim() ? 'unparseable response'
+                                     : 'empty response — rejected before the endpoint ran');
+          }
+          if (!d.ok) throw new Error(d.error || 'save failed');
+          // Rebased, not refetched: the values on screen are the values on disk now, and a
+          // reload would repaint the control under the cursor.
+          VvConfUI.commit(prefix + '-fields');
+          dirty();
+          $('sum').textContent = 'saved ' + changes.length
+                               + ' change' + (changes.length > 1 ? 's' : '');
+          $('sum').className = 'vv-cf-card-s ok';
+        })
+        .catch(e => {
+          // Left dirty on purpose. A refused write changed nothing, and clearing the marks
+          // would say it had.
+          $('sum').textContent = String(e.message || e);
+          $('sum').className = 'vv-cf-card-s bad';
+          dirty();
+        });
+    });
+  };
 })();
 </script>
     <?php

Plugin/unraid/pages/arrs.php

@@ -25,6 +25,7 @@
 // DEPENDS ON
 //   api/arrs.php      polled every 60s   → include/arrs.php
 //   api/confform.php  inline conf edits  → include/confform.php
+require_once dirname(__DIR__) . '/include/confui.php';
 ?>
 <style>
 /* ── Cards ───────────────────────────────────────────────── */
@@ -114,6 +115,13 @@
   <div style="grid-column:1/-1;color:#444;font-size:12px;padding:24px 0;text-align:center;">Loading…</div>
 </div>
 
+
+<?php
+// The conf sections this page is about, drawn by the shared renderer. They were reachable
+// only from the Settings tab's catch-all, which is a long way to go for a setting named
+// after the page you are already looking at.
+vv_conf_ui_card('vv-cf-arrs', 'arr|sonarr|radarr|lidarr', 'Arr settings');
+?>
 <script>
 (function() {
 

Plugin/unraid/pages/docker.php

@@ -25,6 +25,7 @@
 // DEPENDS ON
 //   api/docker.php         polled every 60s   → include/docker.php
 //   api/docker_action.php  start/stop/restart
+require_once dirname(__DIR__) . '/include/confui.php';
 ?>
 <style>
 .vv-dk-toolbar    { display:flex;align-items:center;gap:8px;margin-bottom:12px;padding:0 2px;flex-wrap:wrap; }
@@ -133,6 +134,13 @@
 
 <div class="vv-dk-popover" id="vv-dk-popover" style="display:none;"></div>
 
+
+<?php
+// The conf sections this page is about, drawn by the shared renderer. They were reachable
+// only from the Settings tab's catch-all, which is a long way to go for a setting named
+// after the page you are already looking at.
+vv_conf_ui_card('vv-cf-docker', 'docker', 'Docker settings');
+?>
 <script>
 (function() {
 

Plugin/unraid/pages/fallback.php

@@ -29,6 +29,7 @@
 // DEPENDS ON
 //   api/fallback.php  polled every 30s   → include/fallback.php
 //   api/confform.php  inline conf edits  → include/confform.php
+require_once dirname(__DIR__) . '/include/confui.php';
 ?>
 <style>
 /* ── Existing status styles ── */
@@ -168,6 +169,13 @@
   </div>
 </div>
 
+
+<?php
+// The conf sections this page is about, drawn by the shared renderer. They were reachable
+// only from the Settings tab's catch-all, which is a long way to go for a setting named
+// after the page you are already looking at.
+vv_conf_ui_card('vv-cf-fallback', 'fallback|tier', 'Fallback settings');
+?>
 <script>
 (function() {
 

Plugin/unraid/pages/partnership.php

@@ -35,6 +35,7 @@
 //   api/create_api_key.php        credential provisioning
 //   api/run.php                   long-running deploy operations
 //   api/confform.php              inline conf edits
+require_once dirname(__DIR__) . '/include/confui.php';
 ?>
 <style>
 .vv-pt-grid       { display:grid; gap:12px; }
@@ -157,6 +158,13 @@ textarea.vv-pt-set-input { resize:vertical; white-space:pre; }
   <div id="vv-pt-settings-body" style="display:none;margin-top:10px;"></div>
 </div>
 
+
+<?php
+// The conf sections this page is about, drawn by the shared renderer. They were reachable
+// only from the Settings tab's catch-all, which is a long way to go for a setting named
+// after the page you are already looking at.
+vv_conf_ui_card('vv-cf-partnership', 'partnership', 'Partnership settings');
+?>
 <script>
 // ── Toggle states — persist across 10s poll re-renders ────────────────────────
 const _vvOnboarding  = {};  // hostId → true when onboard steps are expanded

Plugin/unraid/pages/readme/ui-map.md

@@ -31,6 +31,7 @@ those settings genuinely have no control, and saying so is the right answer.
 Reachable from:
 
 - Scheduler tab → **Arrs Failed Stalled Recovery** → Config → *Arr Recovery Toggles*
+- Arrs tab → Arr settings → *Arr Recovery Toggles*
 - Settings tab → All settings → *Arr Recovery Toggles*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -138,6 +139,7 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Docker Daily Restart** → Config → *Docker Daily Restart*
+- Docker tab → Docker settings → *Docker Daily Restart*
 - Settings tab → All settings → *Docker Daily Restart*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -151,6 +153,7 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Docker Network Connect** → Config → *Docker Network Connect*
+- Docker tab → Docker settings → *Docker Network Connect*
 - Settings tab → All settings → *Docker Network Connect*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -165,6 +168,8 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Docker Watchdog** → Config → *Docker Watchdog*
+- Watchdog tab → Watchdog settings → *Docker Watchdog*
+- Docker tab → Docker settings → *Docker Watchdog*
 - Settings tab → All settings → *Docker Watchdog*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -184,6 +189,7 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Docker Weekly Restart** → Config → *Docker Weekly Restart*
+- Docker tab → Docker settings → *Docker Weekly Restart*
 - Settings tab → All settings → *Docker Weekly Restart*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -238,7 +244,10 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 
 ## Fallback Tiers — What HOST1 Wants Covered When Down
 
-Route: Settings tab → All settings → *Fallback Tiers — What HOST1 Wants Covered When Down*
+Reachable from:
+
+- Fallback tab → Fallback settings → *Fallback Tiers — What HOST1 Wants Covered When Down*
+- Settings tab → All settings → *Fallback Tiers — What HOST1 Wants Covered When Down*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
 
@@ -320,6 +329,7 @@ Reachable from:
 - Scheduler tab → **Lidarr Duplicate Artist Cleanup** → Config → *Lidarr*
 - Scheduler tab → **Playback Aware Lidarr Discovery** → Config → *Lidarr*
 - Scheduler tab → **Emby To Lidarr Sync** → Config → *Lidarr*
+- Arrs tab → Arr settings → *Lidarr*
 - Settings tab → All settings → *Lidarr*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -377,6 +387,7 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Network Watchdog** → Config → *Network Watchdog*
+- Watchdog tab → Watchdog settings → *Network Watchdog*
 - Settings tab → All settings → *Network Watchdog*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -489,6 +500,7 @@ Reachable from:
 - Scheduler tab → **Playback Aware Radarr Discovery** → Config → *Radarr*
 - Scheduler tab → **Radarr Tmdb Removed** → Config → *Radarr*
 - Scheduler tab → **Emby To Radarr Sync** → Config → *Radarr*
+- Arrs tab → Arr settings → *Radarr*
 - Settings tab → All settings → *Radarr*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -508,7 +520,10 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 
 ## Rsync Writeback
 
-Route: Settings tab → All settings → *Rsync Writeback*
+Reachable from:
+
+- Rsync tab → Rsync settings → *Rsync Writeback*
+- Settings tab → All settings → *Rsync Writeback*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
 
@@ -538,6 +553,7 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Watchdog Orchestrator** → Config → *SYSTEM WATCHDOG*
+- Watchdog tab → Watchdog settings → *SYSTEM WATCHDOG*
 - Settings tab → All settings → *SYSTEM WATCHDOG*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -573,6 +589,7 @@ Reachable from:
 - Scheduler tab → **Playback Aware Sonarr Discovery** → Config → *Sonarr*
 - Scheduler tab → **Sonarr Tvdb Removed** → Config → *Sonarr*
 - Scheduler tab → **Emby To Sonarr Sync** → Config → *Sonarr*
+- Arrs tab → Arr settings → *Sonarr*
 - Settings tab → All settings → *Sonarr*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -615,7 +632,10 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 
 ## Tier Delays — HOST1 Outage Timers
 
-Route: Settings tab → All settings → *Tier Delays — HOST1 Outage Timers*
+Reachable from:
+
+- Fallback tab → Fallback settings → *Tier Delays — HOST1 Outage Timers*
+- Settings tab → All settings → *Tier Delays — HOST1 Outage Timers*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
 
@@ -913,6 +933,7 @@ Reachable from:
 - Scheduler tab → **Radarr Cleanup** → Config → *Arr Cleanup*
 - Scheduler tab → **Lidarr Cleanup** → Config → *Arr Cleanup*
 - Scheduler tab → **Sonarr Cleanup** → Config → *Arr Cleanup*
+- Arrs tab → Arr settings → *Arr Cleanup*
 - Settings tab → All settings → *Arr Cleanup*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1000,6 +1021,7 @@ Reachable from:
 
 - Scheduler tab → **Radarr Classification Scan** → Config → *Arr Content Classification (radarr/sonarr_classification_scan.sh)*
 - Scheduler tab → **Sonarr Classification Scan** → Config → *Arr Content Classification (radarr/sonarr_classification_scan.sh)*
+- Arrs tab → Arr settings → *Arr Content Classification (radarr/sonarr_classification_scan.sh)*
 - Settings tab → All settings → *Arr Content Classification (radarr/sonarr_classification_scan.sh)*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1017,6 +1039,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Arrs Failed Stalled Recovery** → Config → *Arr Failed/Stalled Recovery*
+- Arrs tab → Arr settings → *Arr Failed/Stalled Recovery*
 - Settings tab → All settings → *Arr Failed/Stalled Recovery*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1033,6 +1056,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Arr Full Rescan** → Config → *Arr Full Library Rescan*
+- Arrs tab → Arr settings → *Arr Full Library Rescan*
 - Settings tab → All settings → *Arr Full Library Rescan*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1043,7 +1067,10 @@ Saved into `master.conf`, which does not need to be opened by hand.
 
 ## Arr Sync
 
-Route: Settings tab → All settings → *Arr Sync*
+Reachable from:
+
+- Arrs tab → Arr settings → *Arr Sync*
+- Settings tab → All settings → *Arr Sync*
 
 Saved into `master.conf`, which does not need to be opened by hand.
 
@@ -1209,6 +1236,8 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Docker Watchdog** → Config → *Docker Watchdog*
+- Watchdog tab → Watchdog settings → *Docker Watchdog*
+- Docker tab → Docker settings → *Docker Watchdog*
 - Settings tab → All settings → *Docker Watchdog*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1304,7 +1333,10 @@ Saved into `master.conf`, which does not need to be opened by hand.
 
 ## FALLBACK
 
-Route: Settings tab → All settings → *FALLBACK*
+Reachable from:
+
+- Fallback tab → Fallback settings → *FALLBACK*
+- Settings tab → All settings → *FALLBACK*
 
 Saved into `master.conf`, which does not need to be opened by hand.
 
@@ -1449,6 +1481,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Network Watchdog** → Config → *Network Watchdog*
+- Watchdog tab → Watchdog settings → *Network Watchdog*
 - Settings tab → All settings → *Network Watchdog*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1623,7 +1656,10 @@ Saved into `master.conf`, which does not need to be opened by hand.
 
 ## Remote Docker Daemon
 
-Route: Settings tab → All settings → *Remote Docker Daemon*
+Reachable from:
+
+- Docker tab → Docker settings → *Remote Docker Daemon*
+- Settings tab → All settings → *Remote Docker Daemon*
 
 Saved into `master.conf`, which does not need to be opened by hand.
 
@@ -1646,6 +1682,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Rsync** → Config → *Rsync Defaults*
+- Rsync tab → Rsync settings → *Rsync Defaults*
 - Settings tab → All settings → *Rsync Defaults*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1668,6 +1705,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Rsync** → Config → *Rsync Enable/Disable*
+- Rsync tab → Rsync settings → *Rsync Enable/Disable*
 - Settings tab → All settings → *Rsync Enable/Disable*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1687,6 +1725,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Rsync** → Config → *Rsync Merge Auto-Promote*
+- Rsync tab → Rsync settings → *Rsync Merge Auto-Promote*
 - Settings tab → All settings → *Rsync Merge Auto-Promote*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1700,6 +1739,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Rsync** → Config → *Rsync Profile System*
+- Rsync tab → Rsync settings → *Rsync Profile System*
 - Settings tab → All settings → *Rsync Profile System*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1806,6 +1846,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Watchdog Orchestrator** → Config → *System Watchdog*
+- Watchdog tab → Watchdog settings → *System Watchdog*
 - Settings tab → All settings → *System Watchdog*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1891,6 +1932,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Watchdog Orchestrator** → Config → *Watchdog Orchestrator*
+- Watchdog tab → Watchdog settings → *Watchdog Orchestrator*
 - Settings tab → All settings → *Watchdog Orchestrator*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1904,6 +1946,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Webgui Watchdog** → Config → *WebGUI Watchdog*
+- Watchdog tab → Watchdog settings → *WebGUI Watchdog*
 - Settings tab → All settings → *WebGUI Watchdog*
 
 Saved into `master.conf`, which does not need to be opened by hand.

Plugin/unraid/pages/rsync.php

@@ -36,6 +36,7 @@
 //   api/rsync_win_arrays.php  share array editing
 //   api/flag_toggle.php       enable/disable toggles
 //   api/confform.php          inline conf edits
+require_once dirname(__DIR__) . '/include/confui.php';
 ?>
 <style>
 .vv-ry-card    { background:#161616;border:1px solid #2a2a2a;border-radius:6px;padding:10px 12px;min-width:0; }
@@ -511,6 +512,13 @@
 
 </div><!-- /layer -->
 
+
+<?php
+// The conf sections this page is about, drawn by the shared renderer. They were reachable
+// only from the Settings tab's catch-all, which is a long way to go for a setting named
+// after the page you are already looking at.
+vv_conf_ui_card('vv-cf-rsync', 'rsync', 'Rsync settings');
+?>
 <script>
 // Shared state — globals so IIFE internals and onclick handlers can both reach them
 var _vvRyWinOpen    = new Set();   // which window panels are expanded

Plugin/unraid/pages/settings.php

@@ -87,20 +87,6 @@ vv_conf_ui_assets();
                    font-size:12px;padding:5px 8px;outline:none;width:100%;box-sizing:border-box;
                    font-family:monospace; }
 .vv-set-inp:focus{ border-color:#444; }
-/* The All-settings header. A row rather than a heading because it carries the disclosure, the
-   filter and the save together — the filter is only meaningful while the card is open, and the
-   save only while something is dirty, so both appear with what they act on. */
-.vv-cf-all-h { display:flex;align-items:center;gap:10px;cursor:pointer;user-select:none;
-               flex-wrap:wrap; }
-.vv-cf-all-c { color:#333;font-size:9px;transition:transform .12s; }
-.vv-cf-all-h.open .vv-cf-all-c { transform:rotate(90deg); }
-.vv-cf-all-f { max-width:260px;cursor:text; }
-/* Scrolls itself rather than growing the page past the viewport — 124 sections is far taller
-   than a screen, and the Save button belongs where it can still be reached. */
-#vv-cf-all { max-height:60vh;overflow-y:auto;margin-top:10px;padding-right:4px; }
-/* Hidden by the filter. display:none rather than removal, so the controls keep their state and
-   a field edited before filtering is still dirty and still saved. */
-.vv-cf-group.vv-filtered { display:none; }
 </style>
 
 <div style="max-width:740px;margin:0 auto;">
@@ -238,29 +224,8 @@ vv_conf_ui_assets();
     <pre class="vv-set-out" id="vv-api-out"></pre>
   </div>
 
-  <!-- Everything else the conf holds. The cards above are purpose-built for the few settings that
+  <?php vv_conf_ui_card('vv-cf-all', '*', 'All settings'); ?>
-       needed a workflow — a migration, a renewal, a webhook test. This is the rest: a third of the
-       configuration had no control anywhere, so the answer to "where do I change X" was "open a
-       file over SSH", which is not an answer a settings page should give.
 
-       Collapsed and loaded on first open. 124 sections is real work to assemble and the card is
-       shut almost every time the page is drawn.
-
-       Five sections are deliberately absent — the machine's identity and the roots everything
-       derives from. See VV_UI_SECTION_EXCLUDE for which, and why each one. -->
-  <div class="vv-set-card">
-    <div class="vv-cf-all-h" id="vv-cf-all-t">
-      <span class="vv-cf-all-c">▶</span>
-      <span class="vv-set-hdr" style="margin-bottom:0;">All settings</span>
-      <input type="text" class="vv-set-inp vv-cf-all-f" id="vv-cf-all-filter"
-             placeholder="filter by name or setting…" style="display:none">
-      <span class="vv-set-sum" id="vv-cf-all-sum" style="margin-left:auto"></span>
-      <button class="vv-set-btn primary" id="vv-cf-all-save" type="button"
-              style="display:none" disabled>Save</button>
-    </div>
-    <div id="vv-cf-all-body" style="display:none">
-      <div id="vv-cf-all"><p class="vv-cf-empty">opens when you do</p></div>
-    </div>
   </div>
 
 </div>
@@ -530,111 +495,4 @@ function vvApiRenew() {
 // Auto-check on load
 vvApiCheck();
 
-// ── All settings ─────────────────────────────────────────────────────────────
-// Every conf section that is not structurally excluded, drawn by the same renderer the AI tab
-// and the Scheduler use and written through the same guarded path. Nothing about which sections
-// exist or what control each field gets is decided here — it is read from the conf.
-const VV_CF_ALL_API = '/plugins/varaverk/api/confform.php';
-let _vvCfAllLoaded = false;
-
-function vvCfAllToggle() {
-  const head = document.getElementById('vv-cf-all-t');
-  const body = document.getElementById('vv-cf-all-body');
-  const open = body.style.display === 'none';
-  body.style.display = open ? '' : 'none';
-  head.classList.toggle('open', open);
-  document.getElementById('vv-cf-all-filter').style.display = open ? '' : 'none';
-  document.getElementById('vv-cf-all-save').style.display   = open ? '' : 'none';
-  // First open only. Reloading on every toggle would discard edits in progress the moment
-  // someone collapsed the card to look at something else.
-  if (open) vvCfAllLoad();
-}
-
-function vvCfAllLoad() {
-  if (_vvCfAllLoaded) return;
-  _vvCfAllLoaded = true;
-  fetch(VV_CF_ALL_API + '?sections=*')
-    .then(r => r.json())
-    .then(d => {
-      if (!d.ok) throw new Error(d.error || 'could not be read');
-      VvConfUI.render('vv-cf-all', d.groups || []);
-      VvConfUI.wire('vv-cf-all', vvCfAllDirty);
-      vvCfAllDirty();
-    })
-    .catch(e => {
-      // Retryable: the flag goes back, so closing and reopening tries again rather than
-      // leaving a permanent error where the settings should be.
-      _vvCfAllLoaded = false;
-      document.getElementById('vv-cf-all').innerHTML =
-        '<p class="vv-cf-empty">could not be read: ' + String(e.message || e) + '</p>';
-    });
-}
-
-function vvCfAllDirty() {
-  const n   = VvConfUI.dirtyCount('vv-cf-all');
-  const btn = document.getElementById('vv-cf-all-save');
-  const sum = document.getElementById('vv-cf-all-sum');
-  btn.disabled = (n === 0);
-  sum.textContent = n ? (n + ' unsaved') : '';
-  sum.style.color = n ? '#ffb74d' : '#444';
-}
-
-// Hides whole sections, never individual fields — a setting means little without the header that
-// says what it belongs to. Matches the section name and the key names inside it, because people
-// look for both. display:none rather than removal, so a field edited before filtering is still
-// dirty and still saved: a filter that silently drops pending edits would be a data-loss bug
-// wearing a search box.
-function vvCfAllFilter() {
-  const q = document.getElementById('vv-cf-all-filter').value.trim().toLowerCase();
-  document.querySelectorAll('#vv-cf-all .vv-cf-group').forEach(g => {
-    g.classList.toggle('vv-filtered', q !== '' && !g.textContent.toLowerCase().includes(q));
-  });
-}
-
-function vvCfAllSave() {
-  const changes = VvConfUI.collect('vv-cf-all');
-  if (!changes.length) return;
-  const btn = document.getElementById('vv-cf-all-save');
-  const sum = document.getElementById('vv-cf-all-sum');
-  btn.disabled = true;
-  sum.textContent = 'saving…';
-  sum.style.color = '#444';
-
-  // URLSearchParams, not FormData — a multipart POST to this plugin's endpoints hangs with no
-  // status ever returned.
-  fetch(VV_CF_ALL_API, { method: 'POST',
-    headers: { 'Content-Type': 'application/x-www-form-urlencoded; charset=UTF-8' },
-    body: new URLSearchParams({ changes: JSON.stringify(changes) }) })
-    .then(r => r.text())
-    .then(t => {
-      let d;
-      try { d = JSON.parse(t); }
-      catch (_) {
-        throw new Error(t.trim() ? 'unparseable response'
-                                 : 'empty response — rejected before the endpoint ran');
-      }
-      if (!d.ok) throw new Error(d.error || 'save failed');
-      // Rebased rather than refetched: the values on screen are now the values on disk, and a
-      // reload would repaint every control including the one just edited.
-      VvConfUI.commit('vv-cf-all');
-      vvCfAllDirty();
-      sum.textContent = 'saved ' + changes.length + ' change' + (changes.length > 1 ? 's' : '');
-      sum.style.color = '#4caf50';
-    })
-    .catch(e => {
-      // Left dirty on purpose. A refused write changed nothing, and clearing the marks would
-      // say it had.
-      sum.textContent = String(e.message || e);
-      sum.style.color = '#ef5350';
-      vvCfAllDirty();
-    });
-}
-
-document.getElementById('vv-cf-all-t').addEventListener('click', e => {
-  // The filter and the save live in the header; clicking either must not collapse the card.
-  if (e.target.closest('#vv-cf-all-filter, #vv-cf-all-save')) return;
-  vvCfAllToggle();
-});
-document.getElementById('vv-cf-all-filter').addEventListener('input', vvCfAllFilter);
-document.getElementById('vv-cf-all-save').addEventListener('click', vvCfAllSave);
 </script>

Plugin/unraid/pages/watchdog.php

@@ -25,6 +25,7 @@
 //
 // DEPENDS ON
 //   api/watchdog.php   polled every 30s   → include/watchdog.php
+require_once dirname(__DIR__) . '/include/confui.php';
 ?>
 <style>
 .vv-wd-card    { background:#161616;border:1px solid #2a2a2a;border-radius:6px;padding:10px;min-width:0; }
@@ -78,6 +79,13 @@
   <div style="grid-column:1/-1;color:#444;font-size:12px;padding:16px 0;text-align:center;">Loading…</div>
 </div>
 
+
+<?php
+// The conf sections this page is about, drawn by the shared renderer. They were reachable
+// only from the Settings tab's catch-all, which is a long way to go for a setting named
+// after the page you are already looking at.
+vv_conf_ui_card('vv-cf-watchdog', 'watchdog', 'Watchdog settings');
+?>
 <script>
 (function() {