Put each page's settings on that page

A watchdog threshold was reachable only from the bottom of a list of a hundred
and twenty on another tab.

Plugin/unraid/pages/readme/ui-map.md

@@ -31,6 +31,7 @@ those settings genuinely have no control, and saying so is the right answer.
 Reachable from:
 
 - Scheduler tab → **Arrs Failed Stalled Recovery** → Config → *Arr Recovery Toggles*
+- Arrs tab → Arr settings → *Arr Recovery Toggles*
 - Settings tab → All settings → *Arr Recovery Toggles*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -138,6 +139,7 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Docker Daily Restart** → Config → *Docker Daily Restart*
+- Docker tab → Docker settings → *Docker Daily Restart*
 - Settings tab → All settings → *Docker Daily Restart*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -151,6 +153,7 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Docker Network Connect** → Config → *Docker Network Connect*
+- Docker tab → Docker settings → *Docker Network Connect*
 - Settings tab → All settings → *Docker Network Connect*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -165,6 +168,8 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Docker Watchdog** → Config → *Docker Watchdog*
+- Watchdog tab → Watchdog settings → *Docker Watchdog*
+- Docker tab → Docker settings → *Docker Watchdog*
 - Settings tab → All settings → *Docker Watchdog*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -184,6 +189,7 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Docker Weekly Restart** → Config → *Docker Weekly Restart*
+- Docker tab → Docker settings → *Docker Weekly Restart*
 - Settings tab → All settings → *Docker Weekly Restart*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -238,7 +244,10 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 
 ## Fallback Tiers — What HOST1 Wants Covered When Down
 
-Route: Settings tab → All settings → *Fallback Tiers — What HOST1 Wants Covered When Down*
+Reachable from:
+
+- Fallback tab → Fallback settings → *Fallback Tiers — What HOST1 Wants Covered When Down*
+- Settings tab → All settings → *Fallback Tiers — What HOST1 Wants Covered When Down*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
 
@@ -320,6 +329,7 @@ Reachable from:
 - Scheduler tab → **Lidarr Duplicate Artist Cleanup** → Config → *Lidarr*
 - Scheduler tab → **Playback Aware Lidarr Discovery** → Config → *Lidarr*
 - Scheduler tab → **Emby To Lidarr Sync** → Config → *Lidarr*
+- Arrs tab → Arr settings → *Lidarr*
 - Settings tab → All settings → *Lidarr*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -377,6 +387,7 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Network Watchdog** → Config → *Network Watchdog*
+- Watchdog tab → Watchdog settings → *Network Watchdog*
 - Settings tab → All settings → *Network Watchdog*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -489,6 +500,7 @@ Reachable from:
 - Scheduler tab → **Playback Aware Radarr Discovery** → Config → *Radarr*
 - Scheduler tab → **Radarr Tmdb Removed** → Config → *Radarr*
 - Scheduler tab → **Emby To Radarr Sync** → Config → *Radarr*
+- Arrs tab → Arr settings → *Radarr*
 - Settings tab → All settings → *Radarr*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -508,7 +520,10 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 
 ## Rsync Writeback
 
-Route: Settings tab → All settings → *Rsync Writeback*
+Reachable from:
+
+- Rsync tab → Rsync settings → *Rsync Writeback*
+- Settings tab → All settings → *Rsync Writeback*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
 
@@ -538,6 +553,7 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Watchdog Orchestrator** → Config → *SYSTEM WATCHDOG*
+- Watchdog tab → Watchdog settings → *SYSTEM WATCHDOG*
 - Settings tab → All settings → *SYSTEM WATCHDOG*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -573,6 +589,7 @@ Reachable from:
 - Scheduler tab → **Playback Aware Sonarr Discovery** → Config → *Sonarr*
 - Scheduler tab → **Sonarr Tvdb Removed** → Config → *Sonarr*
 - Scheduler tab → **Emby To Sonarr Sync** → Config → *Sonarr*
+- Arrs tab → Arr settings → *Sonarr*
 - Settings tab → All settings → *Sonarr*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
@@ -615,7 +632,10 @@ Saved into `host1.conf`, which does not need to be opened by hand.
 
 ## Tier Delays — HOST1 Outage Timers
 
-Route: Settings tab → All settings → *Tier Delays — HOST1 Outage Timers*
+Reachable from:
+
+- Fallback tab → Fallback settings → *Tier Delays — HOST1 Outage Timers*
+- Settings tab → All settings → *Tier Delays — HOST1 Outage Timers*
 
 Saved into `host1.conf`, which does not need to be opened by hand.
 
@@ -913,6 +933,7 @@ Reachable from:
 - Scheduler tab → **Radarr Cleanup** → Config → *Arr Cleanup*
 - Scheduler tab → **Lidarr Cleanup** → Config → *Arr Cleanup*
 - Scheduler tab → **Sonarr Cleanup** → Config → *Arr Cleanup*
+- Arrs tab → Arr settings → *Arr Cleanup*
 - Settings tab → All settings → *Arr Cleanup*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1000,6 +1021,7 @@ Reachable from:
 
 - Scheduler tab → **Radarr Classification Scan** → Config → *Arr Content Classification (radarr/sonarr_classification_scan.sh)*
 - Scheduler tab → **Sonarr Classification Scan** → Config → *Arr Content Classification (radarr/sonarr_classification_scan.sh)*
+- Arrs tab → Arr settings → *Arr Content Classification (radarr/sonarr_classification_scan.sh)*
 - Settings tab → All settings → *Arr Content Classification (radarr/sonarr_classification_scan.sh)*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1017,6 +1039,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Arrs Failed Stalled Recovery** → Config → *Arr Failed/Stalled Recovery*
+- Arrs tab → Arr settings → *Arr Failed/Stalled Recovery*
 - Settings tab → All settings → *Arr Failed/Stalled Recovery*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1033,6 +1056,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Arr Full Rescan** → Config → *Arr Full Library Rescan*
+- Arrs tab → Arr settings → *Arr Full Library Rescan*
 - Settings tab → All settings → *Arr Full Library Rescan*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1043,7 +1067,10 @@ Saved into `master.conf`, which does not need to be opened by hand.
 
 ## Arr Sync
 
-Route: Settings tab → All settings → *Arr Sync*
+Reachable from:
+
+- Arrs tab → Arr settings → *Arr Sync*
+- Settings tab → All settings → *Arr Sync*
 
 Saved into `master.conf`, which does not need to be opened by hand.
 
@@ -1209,6 +1236,8 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Docker Watchdog** → Config → *Docker Watchdog*
+- Watchdog tab → Watchdog settings → *Docker Watchdog*
+- Docker tab → Docker settings → *Docker Watchdog*
 - Settings tab → All settings → *Docker Watchdog*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1304,7 +1333,10 @@ Saved into `master.conf`, which does not need to be opened by hand.
 
 ## FALLBACK
 
-Route: Settings tab → All settings → *FALLBACK*
+Reachable from:
+
+- Fallback tab → Fallback settings → *FALLBACK*
+- Settings tab → All settings → *FALLBACK*
 
 Saved into `master.conf`, which does not need to be opened by hand.
 
@@ -1449,6 +1481,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Network Watchdog** → Config → *Network Watchdog*
+- Watchdog tab → Watchdog settings → *Network Watchdog*
 - Settings tab → All settings → *Network Watchdog*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1623,7 +1656,10 @@ Saved into `master.conf`, which does not need to be opened by hand.
 
 ## Remote Docker Daemon
 
-Route: Settings tab → All settings → *Remote Docker Daemon*
+Reachable from:
+
+- Docker tab → Docker settings → *Remote Docker Daemon*
+- Settings tab → All settings → *Remote Docker Daemon*
 
 Saved into `master.conf`, which does not need to be opened by hand.
 
@@ -1646,6 +1682,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Rsync** → Config → *Rsync Defaults*
+- Rsync tab → Rsync settings → *Rsync Defaults*
 - Settings tab → All settings → *Rsync Defaults*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1668,6 +1705,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Rsync** → Config → *Rsync Enable/Disable*
+- Rsync tab → Rsync settings → *Rsync Enable/Disable*
 - Settings tab → All settings → *Rsync Enable/Disable*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1687,6 +1725,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Rsync** → Config → *Rsync Merge Auto-Promote*
+- Rsync tab → Rsync settings → *Rsync Merge Auto-Promote*
 - Settings tab → All settings → *Rsync Merge Auto-Promote*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1700,6 +1739,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Rsync** → Config → *Rsync Profile System*
+- Rsync tab → Rsync settings → *Rsync Profile System*
 - Settings tab → All settings → *Rsync Profile System*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1806,6 +1846,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Watchdog Orchestrator** → Config → *System Watchdog*
+- Watchdog tab → Watchdog settings → *System Watchdog*
 - Settings tab → All settings → *System Watchdog*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1891,6 +1932,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Watchdog Orchestrator** → Config → *Watchdog Orchestrator*
+- Watchdog tab → Watchdog settings → *Watchdog Orchestrator*
 - Settings tab → All settings → *Watchdog Orchestrator*
 
 Saved into `master.conf`, which does not need to be opened by hand.
@@ -1904,6 +1946,7 @@ Saved into `master.conf`, which does not need to be opened by hand.
 Reachable from:
 
 - Scheduler tab → **Webgui Watchdog** → Config → *WebGUI Watchdog*
+- Watchdog tab → Watchdog settings → *WebGUI Watchdog*
 - Settings tab → All settings → *WebGUI Watchdog*
 
 Saved into `master.conf`, which does not need to be opened by hand.