new approach getting data for transcode manager

Transcodes/transcode_manager.sh

@@ -19,8 +19,9 @@
 #   Permissions drift   → fix silently
 #   Emby not running    → skip threshold checks, verify symlink only
 #
-# Session display shows active Emby streams with per-session storage location —
+# Session display shows active Emby streams with storage state.
-# useful during flip events when sessions are split across ramdisk and SSD.
+# Split state detected when sessions exist on both ramdisk and SSD simultaneously —
+# this happens naturally when symlink flips mid-session.
 #
 # All configuration in Master.conf under Transcode Manager section.
 # Supports --dry-run and --status.
@@ -147,7 +148,6 @@ increment_flip_count() {
     echo "$current_count"
 }
 
-# Query Emby API
 emby_api() {
     local endpoint="$1"
     [[ -z "$EMBY_API_KEY" ]] && return 1
@@ -157,41 +157,19 @@ emby_api() {
         "${EMBY_URL}/${endpoint}" 2>/dev/null
 }
 
-# Determine which storage location a session is using
-# Handles both short hex IDs (live TV) and long UUID format (standard transcodes)
-get_session_location() {
-    local session_id="$1"
-    local transcode_temp="transcoding-temp"
-    local short_id="${session_id:0:6}"  # Emby uses short 6-char IDs for live TV sessions
-
-    # Check ramdisk — exact match first, then short ID prefix match for live TV
-    if [[ -d "$RAMDISK_PATH/$transcode_temp/$session_id" ]] || \
-       ls -d "$RAMDISK_PATH/$transcode_temp/${short_id}"* 2>/dev/null | grep -q .; then
-        echo "ramdisk"
-    # Check SSD — same pattern
-    elif [[ -d "$TRANSCODE_SSD/$transcode_temp/$session_id" ]] || \
-       ls -d "$TRANSCODE_SSD/$transcode_temp/${short_id}"* 2>/dev/null | grep -q .; then
-        echo "ssd"
-    else
-        echo "unknown"
-    fi
-}
-
-# Map Emby media type to readable label
 get_media_type_label() {
     local type="$1"
     case "$type" in
         LiveTv)      echo "Live TV" ;;
+        TvChannel)   echo "Live TV" ;;
         Episode)     echo "TV Show" ;;
         Movie)       echo "Movie" ;;
         Audio)       echo "Music" ;;
         MusicVideo)  echo "Music Video" ;;
-        TvChannel)   echo "Live TV" ;;
         *)           echo "$type" ;;
     esac
 }
 
-# Map Emby play method to readable label
 get_play_method_label() {
     local method="$1"
     case "$method" in
@@ -327,6 +305,11 @@ FLIP_COUNT=$(get_flip_count)
 echo ""
 echo "━━━ $ICON_EMBY Active Emby Sessions ━━━"
 
+TOTAL_SESSIONS=0
+LIVE_TV=0
+TRANSCODING=0
+DIRECT=0
+
 if [[ -z "$EMBY_API_KEY" ]]; then
     info "EMBY_API_KEY not set in Master.conf — skipping session display"
 elif [[ "$EMBY_RUNNING" == false ]]; then
@@ -341,46 +324,54 @@ else
         TOTAL_SESSIONS=$(echo "$SESSION_DATA" | \
             jq '[.[] | select(.NowPlayingItem != null)] | length' 2>/dev/null || echo 0)
         LIVE_TV=$(echo "$SESSION_DATA" | \
-            jq '[.[] | select(.NowPlayingItem != null) | select(.NowPlayingItem.Type == "LiveTv" or .NowPlayingItem.Type == "TvChannel")] | length' 2>/dev/null || echo 0)
+            jq '[.[] | select(.NowPlayingItem != null) | select(.NowPlayingItem.Type == "LiveTv" or .NowPlayingItem.Type == "TvChannel")] | length' \
+            2>/dev/null || echo 0)
         TRANSCODING=$(echo "$SESSION_DATA" | \
-            jq '[.[] | select(.NowPlayingItem != null) | select(.TranscodingInfo != null)] | length' 2>/dev/null || echo 0)
+            jq '[.[] | select(.NowPlayingItem != null) | select(.PlayState.PlayMethod == "Transcode")] | length' \
+            2>/dev/null || echo 0)
         DIRECT=$(echo "$SESSION_DATA" | \
-            jq '[.[] | select(.NowPlayingItem != null) | select(.TranscodingInfo == null)] | length' 2>/dev/null || echo 0)
+            jq '[.[] | select(.NowPlayingItem != null) | select(.PlayState.PlayMethod != "Transcode")] | length' \
+            2>/dev/null || echo 0)
 
         echo "  $ICON_EMBY Total: $TOTAL_SESSIONS  |  $ICON_RAM Live TV: $LIVE_TV  |  $ICON_SYNC Transcoding: $TRANSCODING  |  $ICON_DONE Direct: $DIRECT"
         echo ""
 
         if [[ "$TOTAL_SESSIONS" -gt 0 ]]; then
-            # Parse each active session
+
+            # Storage state — count session folders on each location
+            # Emby folder names don't match API session IDs — per-session location not possible
+            # Split state shows when symlink has flipped mid-session
+            TRANSCODE_TEMP="transcoding-temp"
+            RAM_SESSION_COUNT=$(find "$RAMDISK_PATH/$TRANSCODE_TEMP" \
+                -mindepth 1 -maxdepth 1 -type d 2>/dev/null | wc -l)
+            SSD_SESSION_COUNT=$(find "$TRANSCODE_SSD/$TRANSCODE_TEMP" \
+                -mindepth 1 -maxdepth 1 -type d 2>/dev/null | wc -l)
+
+            if [[ "$RAM_SESSION_COUNT" -gt 0 && "$SSD_SESSION_COUNT" -gt 0 ]]; then
+                warn "$ICON_WARN Split state — $RAM_SESSION_COUNT folder(s) on ramdisk / $SSD_SESSION_COUNT on SSD"
+                warn "Older sessions remain on original location until they end naturally"
+                echo "  $ICON_LINK Storage: $ICON_RAM ramdisk ($RAM_SESSION_COUNT) + $ICON_DISK SSD ($SSD_SESSION_COUNT)"
+            elif [[ "$RAM_SESSION_COUNT" -gt 0 ]]; then
+                echo "  $ICON_LINK Storage: $ICON_RAM ramdisk"
+            elif [[ "$SSD_SESSION_COUNT" -gt 0 ]]; then
+                echo "  $ICON_LINK Storage: $ICON_DISK SSD"
+            else
+                echo "  $ICON_LINK Storage: $ICON_INFO no transcode folders found"
+            fi
+
+            echo ""
+
+            # List each active session
             while IFS= read -r session; do
                 USER=$(echo "$session" | jq -r '.UserName // "Unknown"' 2>/dev/null)
                 TITLE=$(echo "$session" | jq -r '.NowPlayingItem.Name // "Unknown"' 2>/dev/null)
                 MEDIA_TYPE=$(echo "$session" | jq -r '.NowPlayingItem.Type // "Unknown"' 2>/dev/null)
-                SESSION_ID=$(echo "$session" | jq -r '.Id // ""' 2>/dev/null)
+                PLAY_METHOD=$(echo "$session" | jq -r '.PlayState.PlayMethod // "Unknown"' 2>/dev/null)
-
-                # Play method
-                PLAY_METHOD=$(echo "$session" | \
-                    jq -r '.PlayState.PlayMethod // "Unknown"' 2>/dev/null)
-                # Check TranscodingInfo for more accurate method
-                HAS_TRANSCODE=$(echo "$session" | \
-                    jq '.TranscodingInfo != null' 2>/dev/null || echo "false")
-                [[ "$HAS_TRANSCODE" == "true" ]] && PLAY_METHOD="Transcode"
 
                 MEDIA_LABEL=$(get_media_type_label "$MEDIA_TYPE")
                 METHOD_LABEL=$(get_play_method_label "$PLAY_METHOD")
 
-                # Determine storage location for transcoding sessions
+                echo "  $ICON_EMBY $(printf '%-12s' "$USER") — $(printf '%-30s' "$TITLE") — $(printf '%-10s' "$MEDIA_LABEL") — $METHOD_LABEL"
-                if [[ "$HAS_TRANSCODE" == "true" && -n "$SESSION_ID" ]]; then
-                    LOCATION=$(get_session_location "$SESSION_ID")
-                    case "$LOCATION" in
-                        ramdisk) LOC_ICON="$ICON_RAM"  LOC_LABEL="ramdisk" ;;
-                        ssd)     LOC_ICON="$ICON_DISK" LOC_LABEL="SSD" ;;
-                        *)       LOC_ICON="$ICON_INFO"  LOC_LABEL="unknown" ;;
-                    esac
-                    echo "  $ICON_EMBY $(printf '%-12s' "$USER") — $(printf '%-30s' "$TITLE") — $(printf '%-10s' "$MEDIA_LABEL") — $(printf '%-13s' "$METHOD_LABEL") — $LOC_ICON $LOC_LABEL"
-                else
-                    echo "  $ICON_EMBY $(printf '%-12s' "$USER") — $(printf '%-30s' "$TITLE") — $(printf '%-10s' "$MEDIA_LABEL") — $METHOD_LABEL"
-                fi
 
             done < <(echo "$SESSION_DATA" | \
                 jq -c '.[] | select(.NowPlayingItem != null)' 2>/dev/null)
@@ -489,7 +480,7 @@ echo "$ICON_GEAR  Mode:      $TRANSCODE_MANAGER_MODE"
 echo "$ICON_RAM   Ramdisk:   ${RAMDISK_USED_GB}GB used / ${RAMDISK_AVAIL_GB}GB available"
 echo "$ICON_LINK  Symlink:   $TRANSCODE_LINK → $CURRENT_TARGET"
 echo "$ICON_LINK  Flips:     $FLIP_COUNT this hour (warn at $TRANSCODE_FLIP_WARN)"
-echo "$ICON_EMBY  Streams:   ${TOTAL_SESSIONS:-0} total  |  Live TV: ${LIVE_TV:-0}  |  Transcoding: ${TRANSCODING:-0}  |  Direct: ${DIRECT:-0}"
+echo "$ICON_EMBY  Streams:   ${TOTAL_SESSIONS} total  |  Live TV: ${LIVE_TV}  |  Transcoding: ${TRANSCODING}  |  Direct: ${DIRECT}"
 echo "$ICON_TIME  Duration:  $(format_duration $((END - START)))"
 echo "$ICON_DONE  Status:    $ICON_SUCCESS DONE"
 echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"