diff --git a/Docker_essentials/docker_watchdog.sh b/Docker_essentials/docker_watchdog.sh
new file mode 100644
index 0000000..a0a4849
--- /dev/null
+++ b/Docker_essentials/docker_watchdog.sh
@@ -0,0 +1,305 @@
+#!/bin/bash
+# -----------------------------------------------------------------------------------------------
+# --------------------------------- Docker Watchdog --------------------------------------------
+# -----------------------------------------------------------------------------------------------
+# Self-healing watchdog for Docker containers — monitors memory, CPU and HTTP responsiveness.
+# Restarts containers that exceed configured thresholds using a strike system for CPU and
+# responsiveness checks to avoid restarting on brief spikes.
+#
+# Behaviour:
+#   Memory  — immediate restart if hard limit is exceeded
+#   CPU     — strike system, restarts after CPU_FAIL_LIMIT consecutive over-threshold checks
+#   HTTP    — strike system, restarts after RESP_FAIL_LIMIT consecutive failed curl checks
+#
+# Strike system:
+#   Strikes persist between runs via WATCHDOG_STATE_FILE (/tmp — resets on reboot)
+#   Strike cadence depends on cron schedule:
+#     Every 15min + 2 strikes = 30min sustained abuse before restart
+#     Every 10min + 2 strikes = 20min sustained abuse before restart
+#     Every  5min + 2 strikes = 10min sustained abuse before restart
+#
+# All configuration lives in Master.conf under the Docker Watchdog section.
+# Supports --dry-run to show what would be restarted without taking any action.
+# -----------------------------------------------------------------------------------------------
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+source "$SCRIPT_DIR/../Master.conf"
+source "$SCRIPT_DIR/../common.sh"
+
+parse_args "$@"
+
+# Auto-detect total CPU cores for normalisation
+TOTAL_CORES=$(nproc)
+
+# -----------------------------------------------------------------------------------------------
+# ━━━ $ICON_GEAR Setup ━━━
+# -----------------------------------------------------------------------------------------------
+echo ""
+echo "━━━ $ICON_GEAR Setup ━━━"
+
+# ROOT CHECK
+if [[ "$EUID" -ne 0 ]]; then
+    error "Must be run as root"
+    exit 1
+fi
+
+success "Running as root"
+info "$ICON_WATCHDOG Watchdog initialising — $TOTAL_CORES cores detected"
+
+# Ensure state file exists
+touch "$WATCHDOG_STATE_FILE" 2>/dev/null || {
+    error "Cannot create state file: $WATCHDOG_STATE_FILE"
+    exit 1
+}
+
+# -----------------------------------------------------------------------------------------------
+# ━━━ $ICON_SUMMARY Status ━━━
+# -----------------------------------------------------------------------------------------------
+if [[ "$SHOW_STATUS" == true ]]; then
+    echo ""
+    echo "━━━━━ $ICON_SUMMARY STATUS ━━━━━"
+    echo "$ICON_WATCHDOG Containers monitored: ${!WATCHDOG_CONTAINERS[*]}"
+    echo "$ICON_MEM      Soft mem threshold:   ${SOFT_MEM_THRESHOLD}% of per-container limit"
+    echo "$ICON_ZFS      CPU soft threshold:   ${SOFT_CPU_THRESHOLD}%"
+    echo "$ICON_ZFS      CPU hard threshold:   ${HARD_CPU_THRESHOLD}%"
+    echo "$ICON_RETRY    CPU fail limit:       ${CPU_FAIL_LIMIT} strikes"
+    echo "$ICON_PING     Resp fail limit:      ${RESP_FAIL_LIMIT} strikes"
+    echo "$ICON_TIME     Curl timeout:         ${CURL_TIMEOUT}s"
+    echo "$ICON_GEAR     Dry Run:              $DRY_RUN"
+    echo "━━━━━━━━━━━━━━━━━━━━━━━"
+    exit 0
+fi
+
+[[ "$DRY_RUN" == true ]] && warn "DRY RUN — no containers will be restarted"
+
+# -----------------------------------------------------------------------------------------------
+# STATE HELPERS
+# Reads and writes per-container strike counts to the state file.
+# State file format: container:metric:count
+# -----------------------------------------------------------------------------------------------
+
+# Returns current strike count for a container/metric pair.
+# Usage: get_strikes "Emby" "CPU"
+get_strikes() {
+    local container="$1" metric="$2"
+    grep -E "^${container}:${metric}:" "$WATCHDOG_STATE_FILE" 2>/dev/null | cut -d':' -f3
+}
+
+# Sets strike count for a container/metric pair.
+# Usage: set_strikes "Emby" "CPU" 2
+set_strikes() {
+    local container="$1" metric="$2" count="$3"
+    grep -vE "^${container}:${metric}:" "$WATCHDOG_STATE_FILE" 2>/dev/null > "${WATCHDOG_STATE_FILE}.tmp"
+    echo "${container}:${metric}:${count}" >> "${WATCHDOG_STATE_FILE}.tmp"
+    mv "${WATCHDOG_STATE_FILE}.tmp" "$WATCHDOG_STATE_FILE"
+}
+
+# -----------------------------------------------------------------------------------------------
+# HELPERS
+# -----------------------------------------------------------------------------------------------
+
+# Fetches memory and CPU stats for a container in a single docker stats call.
+# Returns: MEM_USAGE|CPU_PERCENT
+parse_stats() {
+    local container="$1"
+    docker stats --no-stream --format "{{.MemUsage}}|{{.CPUPerc}}" "$container"
+}
+
+# Converts a memory value and unit to MB.
+# Supports KiB, MiB, GiB — returns UNKNOWN for unrecognised units.
+convert_to_mb() {
+    local value="$1" unit="$2"
+    case "$unit" in
+        KiB) awk "BEGIN {print $value / 1024}" ;;
+        MiB) echo "$value" ;;
+        GiB) awk "BEGIN {print $value * 1024}" ;;
+        *) echo "UNKNOWN" ;;
+    esac
+}
+
+# Restarts a container locally.
+# In dry run mode reports what would happen without acting.
+restart_container() {
+    local container="$1" reason="$2"
+
+    if [[ "$DRY_RUN" == true ]]; then
+        warn "DRY RUN — would restart $container ($reason)"
+        return
+    fi
+
+    info "Restarting $container ($reason)..."
+    if docker restart "$container" >/dev/null 2>&1; then
+        echo "$ICON_STARTED $container restarted"
+        log "Restarted $container — reason: $reason"
+    else
+        error "Failed to restart $container"
+    fi
+}
+
+# -----------------------------------------------------------------------------------------------
+# MEMORY CHECK
+# Compares current container memory usage against its configured hard limit.
+# Restarts immediately if at or above 100% of limit.
+# Warns if at or above SOFT_MEM_THRESHOLD % of limit.
+# Usage: check_memory "Emby" 16384
+# -----------------------------------------------------------------------------------------------
+check_memory() {
+    local container="$1" limit_mb="$2"
+    local stats mem_raw mem_val mem_unit mem_mb usage_pct
+
+    stats=$(parse_stats "$container")
+    mem_raw=$(echo "$stats" | awk -F'|' '{print $1}' | awk '{print $1}')
+    mem_val=$(echo "$mem_raw" | sed -E 's/([0-9.]+).*/\1/')
+    mem_unit=$(echo "$mem_raw" | sed -E 's/[0-9.]+([a-zA-Z]+).*/\1/')
+    mem_mb=$(convert_to_mb "$mem_val" "$mem_unit")
+    local mem_int
+    mem_int=$(printf "%.0f" "$mem_mb")
+    usage_pct=$(( (mem_int * 100) / limit_mb ))
+
+    if (( usage_pct >= 100 )); then
+        error "$ICON_MEM $container memory ${mem_int}MB (${usage_pct}%) — exceeded ${limit_mb}MB hard limit"
+        restart_container "$container" "memory hard limit"
+        set_strikes "$container" "CPU" 0
+        set_strikes "$container" "RESP" 0
+    elif (( usage_pct >= SOFT_MEM_THRESHOLD )); then
+        warn "$ICON_MEM $container memory ${mem_int}MB (${usage_pct}% of ${limit_mb}MB limit)"
+    else
+        success "$ICON_MEM $container memory ${mem_int}MB (${usage_pct}% of ${limit_mb}MB limit)"
+    fi
+}
+
+# -----------------------------------------------------------------------------------------------
+# CPU CHECK
+# Normalises CPU usage against total core count and applies the strike system.
+# Warns at SOFT_CPU_THRESHOLD, strikes at HARD_CPU_THRESHOLD.
+# Restarts after CPU_FAIL_LIMIT consecutive strikes — resets strikes on restart or recovery.
+# Usage: check_cpu "Emby"
+# -----------------------------------------------------------------------------------------------
+check_cpu() {
+    local container="$1"
+    local stats cpu_raw cpu_norm cpu_int violations
+
+    stats=$(parse_stats "$container")
+    cpu_raw=$(echo "$stats" | awk -F'|' '{print $2}' | tr -d '%')
+    cpu_norm=$(awk "BEGIN {print $cpu_raw / $TOTAL_CORES}")
+    cpu_int=$(printf "%.0f" "$cpu_norm")
+
+    violations=$(get_strikes "$container" "CPU")
+    [[ -z "$violations" ]] && violations=0
+
+    if (( cpu_int >= HARD_CPU_THRESHOLD )); then
+        ((violations++))
+        error "$ICON_ZFS $container CPU ${cpu_int}% — hard threshold hit ($violations/$CPU_FAIL_LIMIT strikes)"
+        set_strikes "$container" "CPU" "$violations"
+    elif (( cpu_int >= SOFT_CPU_THRESHOLD )); then
+        ((violations++))
+        warn "$ICON_ZFS $container CPU ${cpu_int}% — soft threshold hit ($violations/$CPU_FAIL_LIMIT strikes)"
+        set_strikes "$container" "CPU" "$violations"
+    else
+        if (( violations > 0 )); then
+            info "$ICON_ZFS $container CPU ${cpu_int}% — recovered, resetting strikes"
+        else
+            success "$ICON_ZFS $container CPU ${cpu_int}%"
+        fi
+        set_strikes "$container" "CPU" 0
+        violations=0
+    fi
+
+    if (( violations >= CPU_FAIL_LIMIT )); then
+        error "$ICON_ZFS $container hit CPU limit for $CPU_FAIL_LIMIT consecutive checks"
+        restart_container "$container" "sustained CPU abuse"
+        set_strikes "$container" "CPU" 0
+    fi
+}
+
+# -----------------------------------------------------------------------------------------------
+# RESPONSIVENESS CHECK
+# Sends an HTTP request to the container's configured URL.
+# Skips containers with no URL defined in WATCHDOG_CONTAINER_URLS.
+# Applies the same strike system as CPU — restarts after RESP_FAIL_LIMIT consecutive failures.
+# Usage: check_responsiveness "Emby"
+# -----------------------------------------------------------------------------------------------
+check_responsiveness() {
+    local container="$1"
+    local url="${WATCHDOG_CONTAINER_URLS[$container]:-}"
+
+    [[ -z "$url" ]] && return
+
+    local fails
+    fails=$(get_strikes "$container" "RESP")
+    [[ -z "$fails" ]] && fails=0
+
+    if ! curl -s --max-time "$CURL_TIMEOUT" "$url" >/dev/null 2>&1; then
+        ((fails++))
+        warn "$ICON_PING $container unresponsive at $url ($fails/$RESP_FAIL_LIMIT strikes)"
+        set_strikes "$container" "RESP" "$fails"
+    else
+        if (( fails > 0 )); then
+            info "$ICON_PING $container responsive again — resetting strikes"
+        else
+            success "$ICON_PING $container responsive at $url"
+        fi
+        set_strikes "$container" "RESP" 0
+        fails=0
+    fi
+
+    if (( fails >= RESP_FAIL_LIMIT )); then
+        error "$ICON_PING $container unresponsive for $RESP_FAIL_LIMIT consecutive checks"
+        restart_container "$container" "HTTP unresponsive"
+        set_strikes "$container" "RESP" 0
+    fi
+}
+
+# -----------------------------------------------------------------------------------------------
+# ━━━ $ICON_WATCHDOG Watchdog Check ━━━
+# -----------------------------------------------------------------------------------------------
+echo ""
+echo "━━━ $ICON_WATCHDOG Watchdog Check — $(date '+%Y-%m-%d %H:%M:%S') ━━━"
+echo ""
+
+RESTARTED=()
+SKIPPED=()
+
+START=$(date +%s)
+
+for container in "${!WATCHDOG_CONTAINERS[@]}"; do
+    echo "━━━ $ICON_CONTAINERS $container ━━━"
+
+    # Verify container exists
+    if ! docker inspect "$container" &>/dev/null; then
+        warn "$container not found on this host — skipping"
+        SKIPPED+=("$container")
+        echo ""
+        continue
+    fi
+
+    # Verify container is running
+    if ! docker ps --filter "name=^/${container}$" --format "{{.Names}}" | grep -qw "$container"; then
+        warn "$ICON_NOT_RUNNING $container is not running — skipping"
+        SKIPPED+=("$container")
+        echo ""
+        continue
+    fi
+
+    check_memory "$container" "${WATCHDOG_CONTAINERS[$container]}"
+    check_cpu "$container"
+    check_responsiveness "$container"
+
+    echo ""
+done
+
+END=$(date +%s)
+
+# -----------------------------------------------------------------------------------------------
+# ━━━ $ICON_SUMMARY Summary ━━━
+# -----------------------------------------------------------------------------------------------
+echo "━━━━━ $ICON_SUMMARY WATCHDOG SUMMARY ━━━━━"
+echo "$ICON_TIME     $(date '+%Y-%m-%d %H:%M:%S')"
+echo "$ICON_TIME     Duration:  $(format_duration $((END - START)))"
+echo "$ICON_WATCHDOG Monitored: ${#WATCHDOG_CONTAINERS[@]} containers"
+echo "$ICON_NOT_RUNNING Skipped: ${#SKIPPED[@]} containers"
+if [[ "$DRY_RUN" == true ]]; then
+    echo "$ICON_WARN     Dry Run:   no restarts executed"
+fi
+echo "━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━"
\ No newline at end of file
diff --git a/Master.conf b/Master.conf
index e1cfe7c..9a2f80d 100644
--- a/Master.conf
+++ b/Master.conf
@@ -2,7 +2,7 @@
 # ----------------------------------------------------------------------------------------------
 # ---------------------------- Master Variables for unRAID scripts -----------------------------
 # ----------------------------------------------------------------------------------------------
- 
+
 # ━━━ Host Configuration ━━━
 # List the Hostnames of both servers
     HOST1="unRAID-Gmer4Lfe"
@@ -11,16 +11,16 @@
 #   Must have its key added to HOST1_SSH_Key same applies for HOST2
     HOST1_SSH_KEY="/root/.ssh/Gmer4Lfe-rsync-key"
     HOST2_SSH_KEY="/root/.ssh/Jayred365-rsync-key"
- 
+
 # ━━━ Logging ━━━
     ENABLE_LOGGING=true    # false = only echo user-facing messages
- 
+
 # ━━━ Git, Pull & Execute Script ━━━
-    REPO_SSH="git@192.168.50.2:FailedProxy/Unraid_Scripts.git"
-    TARGET_DIR="/mnt/user/appdata/unraid_scripts"
-    GITEA_SSH_KEY="/root/.ssh/id_gitea_rsync"
-    SSH_PORT=221
- 
+REPO_SSH="git@192.168.50.2:FailedProxy/Unraid_Scripts.git"
+TARGET_DIR="/mnt/user/appdata/unraid_scripts"
+GITEA_SSH_KEY="/root/.ssh/id_gitea_rsync"
+SSH_PORT=221
+
 # ━━━ Rsync Script Defaults ━━━
 # These are the fallback values used when no matching profile is found.
 # Any share whose directory basename does not match a profile key below
@@ -39,38 +39,34 @@
 # Directories to exclude during transfer
     EXCLUDE_DIRS=()
 # Default global rsync options
-    DEFAULT_RSYNC_OPTS=(-av --info=progress2 --human-readable --bwlimit="$BW_LIMIT" --inplace --no-whole-file)
- 
+    DEFAULT_RSYNC_OPTS=(-av --info=progress2 --human-readable --bwlimit="$BW_LIMIT" --delete --inplace --no-whole-file)
+
 # ━━━ Remote Health Checks ━━━
 # Abort if remote rootfs usage is at or above this percentage.
 # Protects against rsync writing to rootfs when the remote array is down or drives are missing.
 # Recommended: 75 — gives headroom before the server becomes unstable
     ROOTFS_WARN=75
- 
+
 # ━━━ Daily Sync Shares ━━━
 # Shares synced once daily by Orchestrators/daily_sync.sh
 # Add or remove paths here to manage what gets synced.
 # These shares have no profile entry and fall through to DEFAULT_RSYNC_OPTS above.
-    DAILY_SYNC_SHARES=(
-        /mnt/user/Anime_Movies-Old
-        /mnt/user/Anime_Shows-Old
-        /mnt/user/Anime_Shows
-        /mnt/user/appdata-Failover/Gmer4Lfe/
-        /mnt/user/Intros
-        /mnt/user/Kids_Movies
-        /mnt/user/Kids_Tv_Shows
-        /mnt/user/Movies
-        /mnt/user/Music-New
-        /mnt/user/Music_Videos
-        /mnt/user/Nextcloud
-        /mnt/user/stand-up_comedy
-        /mnt/user/Tv_Shows
-        
+DAILY_SYNC_SHARES=(
+    /mnt/user/Anime_Movies-Old
+    /mnt/user/Anime_Shows-Old
+    /mnt/user/Anime_Shows
+    /mnt/user/Books
+    /mnt/user/Intros
+    /mnt/user/Kids_Movies
+    /mnt/user/Kids_Tv_Shows
+    /mnt/user/Movies
+    /mnt/user/Music_Videos
+    /mnt/user/Nextcloud
+    /mnt/user/stand-up_comedy
+    /mnt/user/Tv_Shows
 )
- 
+
 # ━━━ unRAID Essential Scripts ━━━
-# clear_logs.sh system log file paths
-    LOG_FILES=(/var/log/syslog /var/log/messages /var/log/dmesg)
 # unRAID reboot script user warning time (seconds)
     REBOOT_SLEEP=300
 # unRAID mover stop script timeout (seconds)
@@ -81,7 +77,42 @@
     PHP_CONF="/etc/php-fpm.d/www.conf"
 # php_fpm_max_children.sh max children value
     PHP_MAX_CHILDREN=250
- 
+# clear_logs.sh system log file paths
+    LOG_FILES=(/var/log/syslog /var/log/messages /var/log/dmesg)
+
+# ━━━ Docker Watchdog ━━━
+# Containers to monitor with their memory hard limits in MB
+# 20GB=20480  16GB=16384  14GB=14336  12GB=12288  10GB=10240  8GB=8192  6GB=6144  4GB=4096  1GB=1024
+declare -A WATCHDOG_CONTAINERS=(
+    ["Emby"]=16384
+    ["jellyfin_with_request"]=12288
+    ["LidaTube"]=6144
+    ["Tdarr"]=6144
+    ["Code-Server"]=1024
+)
+
+# Containers to check for HTTP responsiveness — omit a container to skip its check
+declare -A WATCHDOG_CONTAINER_URLS=(
+    ["Emby"]="http://localhost:8096"
+    ["Jellyfin-Gmer4Lfe"]="http://localhost:8095"
+)
+
+# State file for tracking CPU and responsiveness strikes between runs
+# Lives in /tmp — resets on reboot which is correct behaviour for strike tracking
+    WATCHDOG_STATE_FILE="/tmp/container_watchdog_state.db"
+
+# CPU thresholds — normalised against total core count automatically at runtime
+    SOFT_CPU_THRESHOLD=80       # warn at this % of total system CPU
+    HARD_CPU_THRESHOLD=85       # strike at this % of total system CPU
+    CPU_FAIL_LIMIT=2            # consecutive strikes before restart
+
+# Memory threshold
+    SOFT_MEM_THRESHOLD=80       # warn at this % of per-container hard limit
+
+# Responsiveness check settings
+    RESP_FAIL_LIMIT=2           # consecutive failures before restart
+    CURL_TIMEOUT=5              # seconds before curl gives up
+
 # ━━━ Profile System ━━━
 # Profiles are matched by directory basename (lowercased).
 # Example: /mnt/user/appdata-Failover/Arrs_Stack → profile key = arrs_stack
@@ -98,7 +129,7 @@
 #
 # Note: PROFILE_RSYNC_OPTS does NOT inherit from DEFAULT_RSYNC_OPTS —
 #       if you define it for a profile you must list all desired options explicitly
- 
+
 # SPACE-SEPARATED STRINGS
 declare -A PROFILE_RSYNC_OPTS=(
     [arrs_stack]="-av --info=progress2 --human-readable --bwlimit=$BW_LIMIT --delete --inplace"
@@ -107,7 +138,7 @@ declare -A PROFILE_RSYNC_OPTS=(
     [important-data]="-av --human-readable --bwlimit=$BW_LIMIT"
     [emby]="-av --human-readable --bwlimit=$BW_LIMIT"
 )
- 
+
 declare -A PROFILE_BW_LIMIT=(
     [arrs_stack]=5000
     [critical-data]=9500
@@ -115,7 +146,7 @@ declare -A PROFILE_BW_LIMIT=(
     [important-data]=9500
     [emby]=8000
 )
- 
+
 declare -A PROFILE_RETRY_COUNT=(
     [arrs_stack]=3
     [critical-data]=3
@@ -123,7 +154,7 @@ declare -A PROFILE_RETRY_COUNT=(
     [important-data]=3
     [emby]=3
 )
- 
+
 declare -A PROFILE_SLEEP=(
     [arrs_stack]=300
     [critical-data]=300
@@ -131,7 +162,7 @@ declare -A PROFILE_SLEEP=(
     [important-data]=300
     [emby]=300
 )
- 
+
 # SPACE-SEPARATED STRINGS
 declare -A PROFILE_CRITICAL_CONTAINER_NAMES=(
     [arrs_stack]="Sonarr Lidarr Readarr Radarr Prowlarr Bazarr Pinchflat"
@@ -140,7 +171,7 @@ declare -A PROFILE_CRITICAL_CONTAINER_NAMES=(
     [important-data]="Postgres-NextCloud NextCloud"
     [emby]=""
 )
- 
+
 # SPACE-SEPARATED STRINGS — containers that need a delay before starting
 declare -A PROFILE_DELAYED_CONTAINERS=(
     [arrs_stack]=""
@@ -149,7 +180,7 @@ declare -A PROFILE_DELAYED_CONTAINERS=(
     [important-data]="NextCloud"
     [emby]=""
 )
- 
+
 declare -A PROFILE_CONTAINER_DELAY=(
     [arrs_stack]=5
     [critical-data]=10
@@ -157,7 +188,7 @@ declare -A PROFILE_CONTAINER_DELAY=(
     [important-data]=10
     [emby]=5
 )
- 
+
 # SPACE-SEPARATED STRINGS
 declare -A PROFILE_EXCLUDE_DIRS=(
     [arrs_stack]="logs *.tmp"
@@ -168,4 +199,4 @@ declare -A PROFILE_EXCLUDE_DIRS=(
 )
 # ----------------------------------------------------------------------------------------------
 # ---------------------- End Of User Variables, Please adjust above as needed ------------------
-# ----------------------------------------------------------------------------------------------
+# ----------------------------------------------------------------------------------------------
\ No newline at end of file
diff --git a/common.sh b/common.sh
index 7939641..3dc6ddf 100644
--- a/common.sh
+++ b/common.sh
@@ -2,7 +2,7 @@
 # -----------------------------------------------------------------------------------------------
 # ----------------- UNRAID OPS COMMON LIBRARY (STABLE FRAMEWORK v1) ----------------------------
 # -----------------------------------------------------------------------------------------------
-# Version:  2.1
+# Version:  2.2
 # -----------------------------------------------------------------------------------------------
 # Changelog:
 #   v1.0 — Initial stable framework
@@ -33,6 +33,7 @@
 #   v2.0 — ICON_PLUGIN added for User Scripts plugin operations
 #   v2.1 — ICON_ZFS and ICON_MEM added for ZFS and memory diagnostics
 #           Diagnostics icon group added to icon block
+#   v2.2 — ICON_WATCHDOG added for Docker watchdog monitoring operations
 # -----------------------------------------------------------------------------------------------
 
 # -----------------------------------------------------------------------------------------------
@@ -79,6 +80,7 @@ ICON_PHP="👥"           # PHP-FPM operations
 # Diagnostics
 ICON_ZFS="📊"           # ZFS ARC statistics
 ICON_MEM="🧠"           # memory status
+ICON_WATCHDOG="🐾"      # docker watchdog monitoring operations
 
 # Output
 ICON_INFO="ℹ️"