audit and clean master.conf, common.sh, and emby sync tools
master.conf: - reorder ORCHESTRATORS section by run frequency; add missing entries - remove heartbeat vars (watchdogs no longer run in continuous cycle) - remove dead REMOTE_DOCKER_RETRY_WAIT and display-only watchdog interval vars - move INTERMEDIATE_RSYNC_ENABLED into RSYNC two-tier block; reorder by frequency common.sh: - add missing info() and success() definitions — both were called throughout but never defined - update output tier description to list all 5 functions - fix double-icon in check_local_disk_temps() error/warn calls - fix smashed curl/ssh command lines in notify_emby_scan() and check_remote_docker_daemon() - update check_rsync_enabled() comment to include INTERMEDIATE, ordered by frequency emby_to_radarr_sync.sh / emby_to_sonarr_sync.sh: - wire up RADARR_EMBY_LIBRARIES / SONARR_EMBY_LIBRARIES; empty array now scans all libraries
This commit is contained in:
Gmer4Lfe
+40
-54
@@ -37,10 +37,14 @@
|
||||
#
|
||||
# ── ORCHESTRATORS ──────────────────────────────────────────────────────────────────────────
|
||||
# ARRAY START Scripts launched at array start (array_started.sh)
|
||||
# MONTHLY MAINTENANCE Uptime-triggered heavy tasks — ZFS scrub, SMART tests (monthly_maintenance.sh)
|
||||
# ARRAY STOP Scripts run at planned shutdown (array_stopping.sh)
|
||||
# WATCHDOG ORCHESTRATOR Per-minute watchdog runner (watchdog_orchestrator.sh)
|
||||
# SYSTEM WATCHDOG Sub-scripts called by watchdog_orchestrator.sh
|
||||
# CRITICAL SYNC MAINTENANCE 30-minute jobs + sync shares + partnership check (critical_sync_maintenance.sh)
|
||||
# INTERMEDIATE SYNC MAINTENANCE Arr sync + optional mid-day rsync (intermediate_sync_maintenance.sh)
|
||||
# DAILY SYNC MAINTENANCE Job list + media shares (daily_sync_maintenance.sh)
|
||||
# WEEKLY SYNC MAINTENANCE Job list + sync shares + update toggles (weekly_sync_maintenance.sh)
|
||||
# CRITICAL SYNC MAINTENANCE 30-minute jobs + sync shares + partnership check (critical_sync_maintenance.sh)
|
||||
# MONTHLY MAINTENANCE Uptime-triggered heavy tasks — ZFS scrub, SMART tests (monthly_maintenance.sh)
|
||||
#
|
||||
# ── RSYNC ──────────────────────────────────────────────────────────────────────────────────
|
||||
# RSYNC ENABLE/DISABLE Two-tier toggle system — global gate + per-orchestrator
|
||||
@@ -138,7 +142,6 @@
|
||||
# Scripts that issue remote container commands check the remote daemon first.
|
||||
# Below limit → skip operation this run | At limit → notify critical + exit
|
||||
REMOTE_DOCKER_STRIKE_LIMIT=3 # consecutive failures before critical notify
|
||||
REMOTE_DOCKER_RETRY_WAIT=30 # seconds to wait before retrying after failure
|
||||
|
||||
# ==============================================================================================
|
||||
# ── PARTNERSHIP ───────────────────────────────────────────────────────────────────────────────
|
||||
@@ -259,18 +262,6 @@
|
||||
# No changes to orchestrator scripts needed when adding or removing jobs.
|
||||
# Sections ordered by run frequency: array events first, then shortest interval to longest.
|
||||
|
||||
# ━━━ Array Stop ━━━
|
||||
# Scripts run by array_stopping.sh for a planned shutdown — stops everything cleanly in order.
|
||||
# Run sequentially (foreground) — each must complete before the next starts.
|
||||
# Order matters: user scripts first (prevents new ops), then data movement, then containers.
|
||||
ARRAY_STOP_SCRIPTS=(
|
||||
"unRAID_Essentials/user_scripts_stop.sh" # stop background scripts before they start new ops
|
||||
"Fallback/fallback.sh --stop" # gracefully stop fallback (not caught by user_scripts_stop)
|
||||
"unRAID_Essentials/rsync_stop.sh --rsync-only" # kill rsync; skip container recovery (handled below)
|
||||
"unRAID_Essentials/mover_stop.sh" # stop mover after rsync (they conflict on same files)
|
||||
"Docker_Essentials/docker_container_stop.sh" # stop all containers last
|
||||
)
|
||||
|
||||
# ━━━ Array Start ━━━
|
||||
# Scripts launched by array_started.sh when the array comes online.
|
||||
# Launched in order — each as a background process.
|
||||
@@ -287,6 +278,18 @@
|
||||
"Fallback/fallback.sh" # mutual failover — continuous
|
||||
)
|
||||
|
||||
# ━━━ Array Stop ━━━
|
||||
# Scripts run by array_stopping.sh for a planned shutdown — stops everything cleanly in order.
|
||||
# Run sequentially (foreground) — each must complete before the next starts.
|
||||
# Order matters: user scripts first (prevents new ops), then data movement, then containers.
|
||||
ARRAY_STOP_SCRIPTS=(
|
||||
"unRAID_Essentials/user_scripts_stop.sh" # stop background scripts before they start new ops
|
||||
"Fallback/fallback.sh --stop" # gracefully stop fallback (not caught by user_scripts_stop)
|
||||
"unRAID_Essentials/rsync_stop.sh --rsync-only" # kill rsync; skip container recovery (handled below)
|
||||
"unRAID_Essentials/mover_stop.sh" # stop mover after rsync (they conflict on same files)
|
||||
"Docker_Essentials/docker_container_stop.sh" # stop all containers last
|
||||
)
|
||||
|
||||
# ━━━ Watchdog Orchestrator ━━━
|
||||
# watchdog_orchestrator.sh runs WATCHDOG_ORCHESTRATOR_SCRIPTS in order each cron cycle.
|
||||
# Schedule: * * * * * (every minute)
|
||||
@@ -300,9 +303,6 @@
|
||||
"Watchdogs/stability_watchdog.sh" # reboot if all else fails — last line of defense
|
||||
)
|
||||
|
||||
WATCHDOG_ORCHESTRATOR_HEARTBEAT=true
|
||||
WATCHDOG_ORCHESTRATOR_HEARTBEAT_HOURS=1
|
||||
|
||||
# ━━━ System Watchdog ━━━
|
||||
# system_watchdog.sh runs SYSTEM_WATCHDOG_SCRIPTS sequentially each cycle.
|
||||
# Called by watchdog_orchestrator.sh — not scheduled directly.
|
||||
@@ -312,23 +312,6 @@
|
||||
"Watchdogs/System/network_watchdog.sh" # internet, DDNS, Tailscale, NPM proxy
|
||||
)
|
||||
|
||||
# ━━━ Monthly Maintenance ━━━
|
||||
# monthly_maintenance.sh fires only when BOTH gates pass:
|
||||
# 1. Server uptime >= MONTHLY_UPTIME_THRESHOLD_DAYS days
|
||||
# 2. Last run was >= MONTHLY_RUN_INTERVAL_DAYS days ago (or never run)
|
||||
# Cron: 0 3 * * * (daily 3am check — script self-gates, calling daily is safe)
|
||||
# NOT in WATCHDOG_ORCHESTRATOR_SCRIPTS — has its own cron entry.
|
||||
# Add scripts that require a long-stable settled system — scrubs, extended drive tests.
|
||||
# State file on /boot/config — survives reboots (interval gate independent of uptime gate).
|
||||
MONTHLY_MAINTENANCE_SCRIPTS=(
|
||||
#"Tools/zfs_pool_scrub.sh" # ZFS pool integrity scrub — not yet built
|
||||
#"Tools/smart_long_test.sh" # SMART extended drive health test — not yet built
|
||||
)
|
||||
|
||||
MONTHLY_UPTIME_THRESHOLD_DAYS=30 # minimum uptime in days before maintenance fires
|
||||
MONTHLY_RUN_INTERVAL_DAYS=30 # minimum days since last run before running again
|
||||
MONTHLY_LAST_RUN_FILE="/boot/config/monthly_maintenance_last_run.db"
|
||||
|
||||
# ━━━ Critical Sync Maintenance ━━━
|
||||
# critical_sync_maintenance.sh runs every 30 minutes.
|
||||
# Order: CRITICAL_MAINTENANCE_SCRIPTS (jobs) → CRITICAL_SYNC_SHARES (rsync) → partnership --check
|
||||
@@ -348,7 +331,6 @@
|
||||
# and optional mid-day rsync for any shares that need sub-daily propagation.
|
||||
# Schedule: 0 */4 * * *
|
||||
# INTERMEDIATE_SYNC_SHARES is host-specific — configure HOST*_INTERMEDIATE_SYNC_SHARES in host*.conf.
|
||||
INTERMEDIATE_RSYNC_ENABLED=true # set false to disable mid-day rsync without removing shares
|
||||
|
||||
INTERMEDIATE_MAINTENANCE_SCRIPTS=(
|
||||
"Media/arrs_failed_stalled_recovery.sh" # blocklist + re-search failed/stalled arr queue items
|
||||
@@ -423,6 +405,23 @@
|
||||
WEEKLY_SYNC_UPDATES=true # pull container updates locally during weekly window
|
||||
WEEKLY_SYNC_UPDATES_REMOTE=true # pull container updates on remote via SSH
|
||||
|
||||
# ━━━ Monthly Maintenance ━━━
|
||||
# monthly_maintenance.sh fires only when BOTH gates pass:
|
||||
# 1. Server uptime >= MONTHLY_UPTIME_THRESHOLD_DAYS days
|
||||
# 2. Last run was >= MONTHLY_RUN_INTERVAL_DAYS days ago (or never run)
|
||||
# Cron: 0 3 * * * (daily 3am check — script self-gates, calling daily is safe)
|
||||
# NOT in WATCHDOG_ORCHESTRATOR_SCRIPTS — has its own cron entry.
|
||||
# Add scripts that require a long-stable settled system — scrubs, extended drive tests.
|
||||
# State file on /boot/config — survives reboots (interval gate independent of uptime gate).
|
||||
MONTHLY_MAINTENANCE_SCRIPTS=(
|
||||
#"Tools/zfs_pool_scrub.sh" # ZFS pool integrity scrub — not yet built
|
||||
#"Tools/smart_long_test.sh" # SMART extended drive health test — not yet built
|
||||
)
|
||||
|
||||
MONTHLY_UPTIME_THRESHOLD_DAYS=30 # minimum uptime in days before maintenance fires
|
||||
MONTHLY_RUN_INTERVAL_DAYS=30 # minimum days since last run before running again
|
||||
MONTHLY_LAST_RUN_FILE="/boot/config/monthly_maintenance_last_run.db"
|
||||
|
||||
# ==============================================================================================
|
||||
# ── RSYNC ─────────────────────────────────────────────────────────────────────────────────────
|
||||
# ==============================================================================================
|
||||
@@ -440,16 +439,18 @@
|
||||
#
|
||||
# Example — HOST2 data rebuild:
|
||||
# RSYNC_ENABLED=true ← rsync works, individual scripts run fine
|
||||
# CRITICAL_RSYNC_ENABLED=true ← 30min auth stack sync still runs
|
||||
# INTERMEDIATE_RSYNC_ENABLED=false ← skip 4h arr/mid-day rsync during rebuild
|
||||
# DAILY_RSYNC_ENABLED=false ← skip daily HDD syncs during rebuild
|
||||
# WEEKLY_RSYNC_ENABLED=true ← Emby + Critical-Data still sync (NVMe)
|
||||
# CRITICAL_RSYNC_ENABLED=true ← 30min auth stack sync still runs
|
||||
# FALLBACK_RSYNC_ENABLED=true ← handback writeback still works
|
||||
# → Run individual: bash Rsync/rsync.sh /mnt/user/Movies
|
||||
# → When ready: DAILY_RSYNC_ENABLED=true
|
||||
# → When ready: INTERMEDIATE_RSYNC_ENABLED=true DAILY_RSYNC_ENABLED=true
|
||||
RSYNC_ENABLED=true # Tier 1 — global gate, overrides everything below
|
||||
CRITICAL_RSYNC_ENABLED=false # Tier 2 — disabled during HOST2 rebuild, re-enable when ready
|
||||
INTERMEDIATE_RSYNC_ENABLED=true # Tier 2 — intermediate_sync_maintenance.sh rsync section
|
||||
DAILY_RSYNC_ENABLED=false # Tier 2 — HOST2 rebuild in progress, re-enable when ready
|
||||
WEEKLY_RSYNC_ENABLED=true # Tier 2 — weekly_sync_maintenance.sh rsync section
|
||||
CRITICAL_RSYNC_ENABLED=false # Tier 2 — disabled during HOST2 rebuild, re-enable when ready
|
||||
FALLBACK_RSYNC_ENABLED=true # Tier 2 — fallback.sh writeback jobs on handback
|
||||
|
||||
# ━━━ Rsync Defaults ━━━
|
||||
@@ -696,13 +697,6 @@
|
||||
RESP_FAIL_LIMIT=2 # consecutive failed checks before restart
|
||||
CURL_TIMEOUT=5 # seconds per check before timeout
|
||||
|
||||
# Watchdog cycle interval
|
||||
DOCKER_WATCHDOG_INTERVAL=900 # seconds between watchdog cycles (15 minutes)
|
||||
|
||||
# Heartbeat — proof of life logged periodically even when everything is healthy
|
||||
DOCKER_WATCHDOG_HEARTBEAT=true
|
||||
DOCKER_WATCHDOG_HEARTBEAT_HOURS=1
|
||||
|
||||
# Tier 2 master toggle
|
||||
WATCHDOG_SCAN_ALL=true # false = only WATCHDOG_CONTAINERS + required containers
|
||||
|
||||
@@ -1332,19 +1326,11 @@
|
||||
# Single spikes (one bad reading) are ignored — sustained problems trigger reboot.
|
||||
SYS_WATCHDOG_STRIKE_LIMIT=2 # consecutive failures before reboot trigger
|
||||
|
||||
# How often checks run — 300s = 5 minutes.
|
||||
# At STRIKE_LIMIT=2 and INTERVAL=300: problem must persist 10min before reboot.
|
||||
SYSTEM_WATCHDOG_INTERVAL=300
|
||||
|
||||
# Reboot loop protection — if system keeps rebooting something is seriously wrong.
|
||||
# After REBOOT_LIMIT reboots in REBOOT_WINDOW_HRS → shutdown instead of reboot.
|
||||
SYS_WATCHDOG_REBOOT_LIMIT=3
|
||||
SYS_WATCHDOG_REBOOT_WINDOW_HRS=12
|
||||
|
||||
# Heartbeat — proof of life logged periodically even when everything is healthy.
|
||||
SYSTEM_WATCHDOG_HEARTBEAT=true
|
||||
SYSTEM_WATCHDOG_HEARTBEAT_HOURS=1
|
||||
|
||||
# ━━━ RAM Reboot Threshold ━━━
|
||||
# Reboot trigger only — warn/shutdown/recover handled by resource_watchdog.sh
|
||||
# RW_RAM_HARD_GB > SYS_WATCHDOG_MEM_GB always (RM acts before watchdog reboots)
|
||||
|
||||
@@ -38,9 +38,10 @@
|
||||
# without modification. Safe to run multiple times — the second run finds nothing to add.
|
||||
#
|
||||
# ==============================================================================================
|
||||
# CONFIGURATION (host*.conf)
|
||||
# CONFIGURATION (master.conf / host*.conf)
|
||||
# ==============================================================================================
|
||||
#
|
||||
# RADARR_EMBY_LIBRARIES — Emby library names to scan (master.conf); empty = all libraries
|
||||
# HOST*_RADARR_URL / HOST*_RADARR_API_KEY — Radarr connection (aliased by detect_hosts)
|
||||
# HOST*_EMBY_URL / HOST*_EMBY_API_KEY — Emby connection (aliased by detect_hosts)
|
||||
#
|
||||
@@ -156,18 +157,39 @@ echo "$ICON_HOST $MY_ID ($LOCAL_SERVER_NAME)"
|
||||
echo ""
|
||||
echo "━━━ $ICON_SYNC Emby Movie Library ━━━"
|
||||
|
||||
declare -A EMBY_MOVIES # name → tmdb_id (empty string if none)
|
||||
|
||||
if [[ "${#RADARR_EMBY_LIBRARIES[@]}" -gt 0 ]]; then
|
||||
LIBRARIES_JSON=$(_emby_api "Library/VirtualFolders") || { error "Could not fetch Emby libraries"; exit 1; }
|
||||
for lib_name in "${RADARR_EMBY_LIBRARIES[@]}"; do
|
||||
lib_id=$(echo "$LIBRARIES_JSON" | jq -r --arg n "$lib_name" '.[] | select(.Name == $n) | .ItemId' 2>/dev/null)
|
||||
if [[ -z "$lib_id" ]]; then
|
||||
warn "Emby library not found: $lib_name"
|
||||
continue
|
||||
fi
|
||||
log "Scanning library: $lib_name (ItemId: $lib_id)"
|
||||
LIB_JSON=$(_emby_api "Items?ParentId=${lib_id}&IncludeItemTypes=Movie&Recursive=true&Fields=ProviderIds&Limit=5000") || {
|
||||
warn "Could not fetch movies from library: $lib_name"
|
||||
continue
|
||||
}
|
||||
while IFS='|' read -r name tmdb_id; do
|
||||
[[ -z "$name" || "$name" == "null" ]] && continue
|
||||
_is_episode_title "$name" && { log " $ICON_SKIP Skipping episode/garbage: $name"; continue; }
|
||||
EMBY_MOVIES["$name"]="$tmdb_id"
|
||||
done < <(echo "$LIB_JSON" | jq -r '.Items[] | [.Name, (.ProviderIds.Tmdb // "")] | join("|")' 2>/dev/null)
|
||||
done
|
||||
else
|
||||
log "RADARR_EMBY_LIBRARIES empty — scanning all Emby libraries"
|
||||
EMBY_MOVIES_JSON=$(_emby_api "Items?IncludeItemTypes=Movie&Recursive=true&Fields=ProviderIds&Limit=10000") || {
|
||||
error "Could not fetch Emby movies"
|
||||
exit 1
|
||||
}
|
||||
|
||||
declare -A EMBY_MOVIES # name → tmdb_id (empty string if none)
|
||||
|
||||
while IFS='|' read -r name tmdb_id; do
|
||||
[[ -z "$name" || "$name" == "null" ]] && continue
|
||||
_is_episode_title "$name" && { log " $ICON_SKIP Skipping episode/garbage: $name"; continue; }
|
||||
EMBY_MOVIES["$name"]="$tmdb_id"
|
||||
done < <(echo "$EMBY_MOVIES_JSON" | jq -r '.Items[] | [.Name, (.ProviderIds.Tmdb // "")] | join("|")' 2>/dev/null)
|
||||
fi
|
||||
|
||||
EMBY_COUNT=${#EMBY_MOVIES[@]}
|
||||
log "$EMBY_COUNT movies in Emby library"
|
||||
|
||||
@@ -41,7 +41,7 @@
|
||||
# CONFIGURATION (master.conf / host*.conf)
|
||||
# ==============================================================================================
|
||||
#
|
||||
# SONARR_EMBY_LIBRARIES — Emby library names to scan (master.conf)
|
||||
# SONARR_EMBY_LIBRARIES — Emby library names to scan (master.conf); empty = all libraries
|
||||
# HOST*_SONARR_URL / HOST*_SONARR_API_KEY — Sonarr connection (aliased by detect_hosts)
|
||||
# HOST*_EMBY_URL / HOST*_EMBY_API_KEY — Emby connection (aliased by detect_hosts)
|
||||
#
|
||||
@@ -151,16 +151,10 @@ echo "$ICON_HOST $MY_ID ($LOCAL_SERVER_NAME)"
|
||||
echo ""
|
||||
echo "━━━ $ICON_SYNC Emby Series Library ━━━"
|
||||
|
||||
if [[ "${#SONARR_EMBY_LIBRARIES[@]}" -eq 0 ]]; then
|
||||
error "SONARR_EMBY_LIBRARIES not configured — check master.conf"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# Fetch library list and resolve names → ItemIds
|
||||
LIBRARIES_JSON=$(_emby_api "Library/VirtualFolders") || { error "Could not fetch Emby libraries"; exit 1; }
|
||||
|
||||
declare -A EMBY_SERIES # name → tvdb_id (empty string if none)
|
||||
|
||||
if [[ "${#SONARR_EMBY_LIBRARIES[@]}" -gt 0 ]]; then
|
||||
LIBRARIES_JSON=$(_emby_api "Library/VirtualFolders") || { error "Could not fetch Emby libraries"; exit 1; }
|
||||
for lib_name in "${SONARR_EMBY_LIBRARIES[@]}"; do
|
||||
lib_id=$(echo "$LIBRARIES_JSON" | jq -r --arg n "$lib_name" '.[] | select(.Name == $n) | .ItemId' 2>/dev/null)
|
||||
if [[ -z "$lib_id" ]]; then
|
||||
@@ -178,6 +172,18 @@ for lib_name in "${SONARR_EMBY_LIBRARIES[@]}"; do
|
||||
EMBY_SERIES["$name"]="$tvdb_id"
|
||||
done < <(echo "$LIB_JSON" | jq -r '.Items[] | [.Name, (.ProviderIds.Tvdb // "")] | join("|")' 2>/dev/null)
|
||||
done
|
||||
else
|
||||
log "SONARR_EMBY_LIBRARIES empty — scanning all Emby libraries"
|
||||
ALL_JSON=$(_emby_api "Items?IncludeItemTypes=Series&Recursive=true&Fields=ProviderIds&Limit=5000") || {
|
||||
error "Could not fetch Emby series"
|
||||
exit 1
|
||||
}
|
||||
while IFS='|' read -r name tvdb_id; do
|
||||
[[ -z "$name" || "$name" == "null" ]] && continue
|
||||
_is_garbage_title "$name" && { log " $ICON_SKIP Skipping garbage title: $name"; continue; }
|
||||
EMBY_SERIES["$name"]="$tvdb_id"
|
||||
done < <(echo "$ALL_JSON" | jq -r '.Items[] | [.Name, (.ProviderIds.Tvdb // "")] | join("|")' 2>/dev/null)
|
||||
fi
|
||||
|
||||
EMBY_COUNT=${#EMBY_SERIES[@]}
|
||||
log "$EMBY_COUNT series in Emby library"
|
||||
|
||||
@@ -186,16 +186,20 @@ ICON_SUCCESS="✅"
|
||||
# ==============================================================================================
|
||||
# Standardised output functions used across all scripts.
|
||||
#
|
||||
# Two-tier model:
|
||||
# Output tiers:
|
||||
# echo — always visible — summaries, status conclusions, section headers
|
||||
# info() — always visible — status confirmations, reachability, check pass
|
||||
# warn() — always visible — state transitions, warnings, important events
|
||||
# error() — always visible — something broke
|
||||
# success() — always visible — operation completed successfully
|
||||
# log() — only with --log flag — per-item detail, internal checks
|
||||
#
|
||||
# All output goes to stdout — callers can redirect as needed.
|
||||
|
||||
info() { echo "$ICON_INFO [INFO] $*"; }
|
||||
warn() { echo "$ICON_WARN [WARN] $*"; }
|
||||
error() { echo "$ICON_ERROR [ERROR] $*"; }
|
||||
success() { echo "$ICON_DONE [OK] $*"; }
|
||||
|
||||
log() {
|
||||
[[ "${ENABLE_LOGGING:-false}" == true ]] && echo "[LOG] $*"
|
||||
@@ -673,9 +677,10 @@ ping_internet() {
|
||||
# Tier 2: orchestrator-specific flag — fine-grained control per window
|
||||
#
|
||||
# Usage:
|
||||
# check_rsync_enabled "CRITICAL" ← checks RSYNC_ENABLED + CRITICAL_RSYNC_ENABLED
|
||||
# check_rsync_enabled "INTERMEDIATE" ← checks RSYNC_ENABLED + INTERMEDIATE_RSYNC_ENABLED
|
||||
# check_rsync_enabled "DAILY" ← checks RSYNC_ENABLED + DAILY_RSYNC_ENABLED
|
||||
# check_rsync_enabled "WEEKLY" ← checks RSYNC_ENABLED + WEEKLY_RSYNC_ENABLED
|
||||
# check_rsync_enabled "CRITICAL" ← checks RSYNC_ENABLED + CRITICAL_RSYNC_ENABLED
|
||||
# check_rsync_enabled "FALLBACK" ← checks RSYNC_ENABLED + FALLBACK_RSYNC_ENABLED
|
||||
# check_rsync_enabled ← checks RSYNC_ENABLED only (direct rsync.sh call)
|
||||
#
|
||||
@@ -906,12 +911,12 @@ check_local_disk_temps() {
|
||||
|
||||
if [[ ${#crit_drives[@]} -gt 0 ]]; then
|
||||
TEMP_CHECK_RESULT="CRITICAL temps: ${crit_drives[*]}"
|
||||
error "$ICON_WARN Drive temp CRITICAL — aborting all remaining syncs: ${crit_drives[*]}"
|
||||
error "Drive temp CRITICAL — aborting all remaining syncs: ${crit_drives[*]}"
|
||||
notify "Rsync aborted on $(hostname) — drive temp CRITICAL: ${crit_drives[*]}" "Rsync Temp Check" "warning"
|
||||
return 2
|
||||
elif [[ ${#hot_drives[@]} -gt 0 ]]; then
|
||||
TEMP_CHECK_RESULT="HOT drives: ${hot_drives[*]}"
|
||||
warn "$ICON_WARN Drive temp WARNING — skipping this profile: ${hot_drives[*]}"
|
||||
warn "Drive temp WARNING — skipping this profile: ${hot_drives[*]}"
|
||||
notify "Rsync profile skipped on $(hostname) — drive temp WARNING: ${hot_drives[*]}" "Rsync Temp Check" "normal"
|
||||
return 1
|
||||
else
|
||||
@@ -1536,7 +1541,9 @@ notify_emby_scan() {
|
||||
|
||||
# Get all scheduled tasks
|
||||
local tasks_response
|
||||
tasks_response=$(curl -sf --max-time 15 -H "X-Api-Key: $EMBY_API_KEY" "${EMBY_URL}/ScheduledTasks" 2>/dev/null)
|
||||
tasks_response=$(curl -sf --max-time 15 \
|
||||
-H "X-Api-Key: $EMBY_API_KEY" \
|
||||
"${EMBY_URL}/ScheduledTasks" 2>/dev/null)
|
||||
|
||||
if [[ -z "$tasks_response" ]]; then
|
||||
warn "Could not reach Emby scheduled tasks API at $EMBY_URL — skipping scan"
|
||||
@@ -1545,11 +1552,17 @@ notify_emby_scan() {
|
||||
|
||||
# Find the "Clean Missing Files" task ID
|
||||
local task_id
|
||||
task_id=$(echo "$tasks_response" | grep -o '"Id":"[^"]*","Name":"[^"]*Clean Missing[^"]*"' | grep -o '"Id":"[^"]*"' | sed 's/"Id":"//;s/"//' | head -1)
|
||||
task_id=$(echo "$tasks_response" | \
|
||||
grep -o '"Id":"[^"]*","Name":"[^"]*Clean Missing[^"]*"' | \
|
||||
grep -o '"Id":"[^"]*"' | \
|
||||
sed 's/"Id":"//;s/"//' | head -1)
|
||||
|
||||
# Fallback — try "Scan Media Library" if Clean Missing not found
|
||||
if [[ -z "$task_id" ]]; then
|
||||
task_id=$(echo "$tasks_response" | grep -o '"Id":"[^"]*","Name":"[^"]*Scan Media Library[^"]*"' | grep -o '"Id":"[^"]*"' | sed 's/"Id":"//;s/"//' | head -1)
|
||||
task_id=$(echo "$tasks_response" | \
|
||||
grep -o '"Id":"[^"]*","Name":"[^"]*Scan Media Library[^"]*"' | \
|
||||
grep -o '"Id":"[^"]*"' | \
|
||||
sed 's/"Id":"//;s/"//' | head -1)
|
||||
[[ -n "$task_id" ]] && log "Clean Missing Files not found — using Scan Media Library"
|
||||
fi
|
||||
|
||||
@@ -1563,7 +1576,12 @@ notify_emby_scan() {
|
||||
|
||||
# Trigger the task
|
||||
local http_code
|
||||
http_code=$(curl -sf --max-time 15 -X POST -H "X-Api-Key: $EMBY_API_KEY" -w "%{http_code}" -o /dev/null "${EMBY_URL}/ScheduledTasks/Running/${task_id}" 2>/dev/null)
|
||||
http_code=$(curl -sf --max-time 15 \
|
||||
-X POST \
|
||||
-H "X-Api-Key: $EMBY_API_KEY" \
|
||||
-w "%{http_code}" \
|
||||
-o /dev/null \
|
||||
"${EMBY_URL}/ScheduledTasks/Running/${task_id}" 2>/dev/null)
|
||||
|
||||
if [[ "$http_code" == "204" ]] || [[ "$http_code" == "200" ]]; then
|
||||
warn "$ICON_EMBY Emby Clean Missing Files triggered — ghost entries will be removed"
|
||||
@@ -1687,7 +1705,8 @@ REMOTE_DOCKER_STRIKES=0
|
||||
check_remote_docker_daemon() {
|
||||
local timeout="${1:-10}"
|
||||
|
||||
if ssh -i "$SSH_KEY" -o ConnectTimeout="$timeout" root@"$REMOTE_SERVER" "timeout $timeout docker info" >/dev/null 2>&1; then
|
||||
if ssh -i "$SSH_KEY" -o ConnectTimeout="$timeout" root@"$REMOTE_SERVER" \
|
||||
"timeout $timeout docker info" >/dev/null 2>&1; then
|
||||
# Daemon healthy — clear strikes if we had issues
|
||||
if [[ "$REMOTE_DOCKER_STRIKES" -gt 0 ]]; then
|
||||
info "Remote Docker daemon on $REMOTE_SERVER_NAME recovered — clearing strikes"
|
||||
|
||||
Reference in New Issue
Block a user